Uniden WDSS 5335, WDSS 5335 owner manual Direct Wall Mounting

Page 15

Direct Wall Mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 1.5m of a working phone jack to avoid excessive wire lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with a minimum length of 35mm, with anchoring devices suitable for the wall material where the base unit will be placed.

) Insert two mounting screws into the wall, using the appropriate anchoring device, 100mm inches apart. Allow about 3mm between the wall and screw heads for mounting the phone.

2) Refer to the steps on page 13 to complete the mounting process.

TOP

3mm1/8 in.

100mm3-15/16 in.

35mm

1-3/8 in.

14

Image 15

Contents Wdss 5335 Wdss 5335+1 Wdss 5335+2 Table of Contents Using Special Features Using Your PhoneUsing Caller ID, Call Waiting, and Redial Lists Finding a Lost Handset Using Conference and TransferPrecautions Using the Answering SystemMaintenance TroubleshootingWelcome Manual Conventions Terminology Used in this ManualFeatures Answering System FeaturesProduct Overview Menu/clear key Parts of the PhoneVol key Vol + key BaseReading the Display Using the InterfaceUsing the Handset Menus Using the Four-way Function KeyEntering Text from Your Handset Choosing the Best Location Installing the PhoneWall Mounting the Base Direct Wall Mounting Installing the Battery Installing the Belt Clip Connecting the Base and Charging the HandsetHigh Speed Internet Connecting to the Phone LineTesting the Connection Basic Setup Activating Personal Distinctive RingActivating the Key Touch Tone Insert Name TagAdding Accessory Handsets Charging Accessory HandsetsCompatible Handsets Registering Wdss 5305 Accessory Handsets Resetting Handsets Setting Up the Phonebook Creating Phonebook EntriesEnter the name for this entry Edit Name Finding a Phonebook Entry Editing an Existing Phonebook EntryAssign a personal ring tone for this entry Personal Ring Deleting Phonebook Entries Storing Caller ID or Redial Numbers in the PhonebookCopying Phonebook Entries to Another Handset Selecting a Ring Tone Handset only Customizing Your Phone Press menu/clear Activating AutoTalk Handset onlyActivating Any Key Answer Handset only Activating Clarity Boost for All Calls Handset onlyUsing Your Phone Press select Switching to the Handset Speakerphone During a CallMaking a Call from the Phonebook Chain Dialing from the PhonebookUsing Caller ID, Call Waiting, and Redial Lists Using the Caller ID ListMaking a Call from a Caller ID Record For New Zealand Model Using Call WaitingDeleting Caller ID Numbers For Australian ModelDeleting a Redial Record Redialing a NumberAdjusting the Speaker Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Earpiece VolumeAdjusting the Audio Tone Using the Clarity Boost FeatureFinding a Lost Handset Answering a Transferred Call Using Conference and TransferConferencing Transferring a CallMuting the Microphone Using Special FeaturesPrivacy Mode Muting the Ringer One call onlyMaking an Intercom Using the IntercomInstalling the Optional Headset Setting Up the Answering System Handset operation Using the Answering System InterfaceSetting the Day & Time Setting the Number of RingsRecording a Personal Greeting Selecting a GreetingFrom the base Deleting Your Personal Greeting Setting the Record Time or Announce onlyActivating Call Screening Activating the Message AlertUsing the Answering System Turning Your Answering System On and OffFrom the base From the handset Reviewing Messages Turning Off the Message Alert Tone Screening CallsOperating the Answering System While You Are Away from Home Page Specifications MaintenanceCleaning the Battery Contacts Battery Replacement and HandlingTalk and Standby Times Low Battery AlertResetting the Handset TroubleshootingResetting the Handset Without the Base Changing the Digital Security CodeTraveling Out of Range Symptom Suggestion Common IssuesMemory may be full. Delete some or all of the saved messages Symptom Suggestion Handset Base Liquid DamageRechargeable Nickel-Metal-Hydride Battery Warning PrecautionsIndex Handset Accessing the answeringPIN Memo Memo Memo Memo Remote Operation Card Task Key Improperly installed One Year Limited WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited