Uniden WDSS 5335 Connecting the Base and Charging the Handset, Installing the Belt Clip

Page 17

Connecting the Base and Charging the Handset

) Connect the AC adapter to the DC IN 9V jack.

CAUTION: To avoid risk of fire and shock, only use the Uniden AAD-041S AC adapter.

2)Connect the AC adapter to a standard 240V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch.

3)Place the handset in the base with the LCD screen facing forward.

4)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.

5)Charge your handset at least 15 to 20 hours before plugging into the phone line.

To AC outlet

To DC IN 9V

AC adapter (supplied)

Installing the Belt Clip

Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks.

To remove the belt clip, pull either side of the belt clip to release the tabs from the holes.

16

Image 17

Contents Wdss 5335 Wdss 5335+1 Wdss 5335+2 Table of Contents Using Caller ID, Call Waiting, and Redial Lists Using Your PhoneFinding a Lost Handset Using Conference and Transfer Using Special FeaturesMaintenance Using the Answering SystemTroubleshooting PrecautionsWelcome Manual Conventions Terminology Used in this ManualProduct Overview FeaturesAnswering System Features Menu/clear key Parts of the PhoneVol key Vol + key BaseReading the Display Using the InterfaceUsing the Handset Menus Using the Four-way Function KeyEntering Text from Your Handset Choosing the Best Location Installing the PhoneWall Mounting the Base Direct Wall Mounting Installing the Battery Installing the Belt Clip Connecting the Base and Charging the HandsetHigh Speed Internet Connecting to the Phone LineTesting the Connection Activating the Key Touch Tone Basic SetupActivating Personal Distinctive Ring Insert Name TagCompatible Handsets Adding Accessory HandsetsCharging Accessory Handsets Registering Wdss 5305 Accessory Handsets Resetting Handsets Enter the name for this entry Edit Name Setting Up the PhonebookCreating Phonebook Entries Assign a personal ring tone for this entry Personal Ring Finding a Phonebook EntryEditing an Existing Phonebook Entry Deleting Phonebook Entries Storing Caller ID or Redial Numbers in the PhonebookCopying Phonebook Entries to Another Handset Selecting a Ring Tone Handset only Customizing Your PhoneActivating Any Key Answer Handset only Activating AutoTalk Handset onlyActivating Clarity Boost for All Calls Handset only Press menu/clearUsing Your Phone Making a Call from the Phonebook Switching to the Handset Speakerphone During a CallChain Dialing from the Phonebook Press selectMaking a Call from a Caller ID Record Using Caller ID, Call Waiting, and Redial ListsUsing the Caller ID List Deleting Caller ID Numbers Using Call WaitingFor Australian Model For New Zealand ModelDeleting a Redial Record Redialing a NumberAdjusting the Ringer Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Earpiece Volume Adjusting the Speaker VolumeFinding a Lost Handset Adjusting the Audio ToneUsing the Clarity Boost Feature Conferencing Using Conference and TransferTransferring a Call Answering a Transferred CallPrivacy Mode Using Special FeaturesMuting the Ringer One call only Muting the MicrophoneMaking an Intercom Using the IntercomInstalling the Optional Headset Setting Up the Answering System Handset operation Using the Answering System InterfaceSetting the Day & Time Setting the Number of RingsFrom the base Recording a Personal GreetingSelecting a Greeting Deleting Your Personal Greeting Setting the Record Time or Announce onlyActivating Call Screening Activating the Message AlertFrom the base From the handset Using the Answering SystemTurning Your Answering System On and Off Reviewing Messages Turning Off the Message Alert Tone Screening CallsOperating the Answering System While You Are Away from Home Page Specifications MaintenanceCleaning the Battery Contacts Battery Replacement and HandlingTalk and Standby Times Low Battery AlertResetting the Handset TroubleshootingTraveling Out of Range Resetting the Handset Without the BaseChanging the Digital Security Code Symptom Suggestion Common IssuesMemory may be full. Delete some or all of the saved messages Symptom Suggestion Handset Base Liquid DamageRechargeable Nickel-Metal-Hydride Battery Warning PrecautionsIndex Handset Accessing the answeringPIN Memo Memo Memo Memo Remote Operation Card Task Key Improperly installed One Year Limited WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited