Adding Accessory Handsets
Your phone supports up to eight (8), including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a
Compatible Handsets
Your phone is compatible with the WDSS 5305. If you purchase an accessory handset, you must register the handset to the base before use. Accessory handsets will not operate until they are registered.
Charging Accessory Handsets
The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger.
) Connect the AC adapter to the DC IN 9V jack and to a 240V AC outlet that is not controlled by a wall switch.
Caution: Use only the Uniden
2)Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.
3)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.
4)Charge the handset battery pack for at least
Route the cord.
To AC outlet To DC IN 9V
AC adapter (supplied)
21