Uniden D13842BK manual Using the System While You’re Away from Home, Screening Your Calls

To...	Follow these steps:
skip a message	Select 3:Skip.
delete this message	Select 4:Delete.
play old messages	After the system plays all new messages, select 2:Play.
stop playback	Select 5:Stop.

Screening Your Calls

While the system takes a message, you can listen from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby.

To...	Press...
hear the caller leaving a message	Message/mute.
answer the call	Talk/flash.
mute the call screen without	End or return the handset to the cradle.
answering*

*If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.

Using the System While You’re Away from Home

You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a Security Code

With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

## Remember to make a note of your new security code! Dialing In to Your System

1.Call your phone number from any touch-tone phone, and wait until the system answers.

xx If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don’t. You can hang up during the third ring.

xx If the system is turned off, it answers after 10 rings and beeps sound.

2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.

12 - English