xx Each handset remembers the last 5 numbers you dialed on it. xx Only one handset can access one of the lists at a time.
To... | Press... | |
open the list | Phonebook/Left, Caller ID/RIGHT, or | |
Redial/pause. | ||
| ||
scroll through the list | Up or Down. | |
dial the current entry | Talk/flash or Speaker. | |
add 1 at the front of CID number | * before dialing for a toll call. | |
store the current CID or redial entry | Menu/SELECT, then select Store Into Pb. | |
to the phonebook | Proceed to edit the name and number. | |
edit the current phonebook entry | Menu/select, then select Edit. | |
delete the current entry | Menu/select, then select Delete (or | |
Delete Entry). To confirm, select Yes. | ||
| ||
close the list | Phonebook/Left. |
## When it’s in standby, the handset shows how many calls came in since the last time you checked the CID list.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press Menu/select and then select Create New. Proceed to enter a name and number.
xx Enter the phone number (up to 20 digits) exactly as you would dial it.
xx If you need to enter a pause between the numbers, press Redial/pause; you’ll see a P in the display. (The dialing will pause for about 2 seconds per a digit.)
xx To edit the number, press Intercom/clear to back up the cursor and delete numbers.
Deleting All the Entries
With the phone in standby, open the list (phonebook, CID, or redial). Press Menu/ select and then select Delete All. To confirm, select Yes.
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you can save that code number as a regular phonebook entry and use the phonebook to send the code number.
Make a call normally. When you hear the prompt that asks you to enter your number, open the phonebook and find the entry. Press Menu/select to send the code. If you change your mind, just close the phonebook.