3.Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers and reconnecting cords.
Adapter and Battery Information
AC adapter |
| Base | |
Part number |
| ||
Input voltage |
| 120V AC, 60 Hz | |
Output voltage |
| 8V AC @ 300mA | |
|
| ||
Battery pack (with normal use) | |||
Part number |
| ||
Capacity |
| 300mAh, 2.4V DC | |
Talk time |
| about 7 hours | |
Standby time |
| about 6 days | |
Battery life |
| about 1 year | |
xxUse only the supplied AC adapters. xxUse the proper adapter for the base.
xxDo not place the unit in direct sunlight or subject it to high temperatures.
xxReplace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover).
xxWhen the battery gets low, the handset beeps or shows a low battery alert; put the handset in the cradle for recharging.
Rechargeable Battery Warning
xx This equipment contains a rechargeable
California to cause cancer.
xx Do not
xx The batteries in this equipment may explode if disposed of in a fire.
xx Do not charge the batteries in any charger other than the one specified in the owner’s
manual. Using another charger may damage the battery or cause it to explode.
xx As part of our commitment to protecting our environment and
conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used
batteries within the United States. Please call
Rechargeable batteries must be recycled or disposed of properly.
Warning! The cords on this product and/ or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.
Uniden works to reduce lead content in PVC coated cords in our products and accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company.
An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected