Uniden D1481, D1483 Using the Answering System, Using a Voice Mail Service, Using Call Waiting

Make a call normally. When you hear the prompt that asks you to enter your number, open the phonebook and find the entry. Press Menu/select to send the code. If you change your mind, just close the phonebook.

Using Call Waiting

xxCall Waiting, a service available from your telephone provider, lets you receive calls while you are on another call. Caller ID on Call Waiting (CIDCW) service displays Caller ID information for a waiting call.

xxIf you get a Call Waiting call, the phone sounds a tone. Press Talk/flash to switch between the current call and the waiting call; each time you switch, there is a short pause before you’re connected to the other caller.

Using a Voice Mail Service

xxIf you subscribe to a voice mail service, your phone can notify you when you have a new message waiting. This feature supports Frequency-Shift Keying (FSK) message notification. Contact your voice mail provider for

more information.

xxWhen you have new messages, the Status LED on the handset blinks, and the display shows a message icon.

xxAfter you listen to your messages, the voice message icon turns off. If it doesn’t, you can reset it. With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Using the Answering System

Answering System Options (Answering Setup)

You can set or change the answering system options from the handset. Just open the menu and select Answering Setup. Select one of the following:

Menu Option	What it does
Security Code	Enter a 2-digit PIN so you can access your answering system
	from any touch-tone phone (see p. 11).
Ring Time	Set the number of rings (2, 4, or 6) before the system
	answers (see p. 12 about Toll Saver).
	Set the amount of time (1 or 4 minutes) callers have to leave
Record Time	a message. The system records up to 12 minutes 30 seconds
	of messages. Choose Announce Only if you don't want the
	system to let callers to leave a message.
	Have the base beep every 15 seconds when you have a new
Message Alert	message. The alert stops after you listen to all your new
	messages or if you press any key on the base.
Ans. Language	Change the language of the system's voice prompts.
Call Screen	Turn on the call screen feature on the base (see p. 11).
		English - 9