Ans. Setup menu options
You can change the answering system options from any station. Just open the menu and select Ans. Setup.
Record Greeting (Base only) Record an outgoing message (see page 22)
Greeting | (Base only) Change greetings or delete your personal | |
Options | greeting (see page 22). | |
Security Code | Enter a | |
system from any | ||
| ||
| Set the number of rings (2, 4, or 6) before the answering | |
Ring Time | system answers the phone. Choose Toll Saver (TS) to | |
have the system pick up after 2 rings if you have new | ||
| ||
| messages or after 4 rings if you don't. | |
| Set the amount of time callers have to leave a message, | |
Record Time | either 1 minute or 4 minutes. Choose Announce Only if | |
| you don't want the system to let callers to leave a message. | |
| Have the system beep every 15 seconds when you have | |
Message Alert | a new message; the beeping stops when you listen to all | |
your new messages. (To mute the alert without listening to | ||
| ||
| your messages, press any key on the base.) | |
|
| |
Ans. Language | Change the language of the system's voice prompts. | |
|
| |
Call Screen | Turn on the call screen feature so you can hear callers as | |
they leave messages on the base speaker (see page 24). | ||
| ||
Ans. On/off | (Handset only) Turn your answering system on or off. (To | |
turn your system on or off from the base, just press On/off.) | ||
|
Getting Your Messages
Accessing your answering system from a handset
You can access your system from a cordless handset whenever the phone is in standby.
1:Repeat | 3:Skip | 5:Stop | 6:SelectGreeting | |||
2:Play | 4:Delete | [ / /select] | 8:RecNewGreeting | |||
|
|
|
|
| ||
Use PHONEBOOK/LEFT | to go |
| Use | CALLER ID/RIGHT to | ||
to the previous option. |
| go to | the next option. | |||
| Press SELECT/MENU to |
|
|
| ||
| Press | FLASH/EXIT to stop | ||||
| choose the current option. | remote | operation mode. |
23