) Line up the red and black wires on the battery pack with the label inside the handset.
) Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.
Black
Red
) Place the cover over the battery compartment and slide it up into place.
Connect the charger
) Connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)
) Plug the other end of the adapter into a standard 120V AC power outlet.
) Place each handset in a charger with the display facing forward. The charge light should turn on.
If... | Try... | |
the charge | - reseating the handset. | |
light doesn't | - checking the AC adapter connection. | |
turn on | - seeing if the outlet is controlled by a wall | |
switch. | ||
|
Charge all handsets completely (about 15 hours) before using them.
Test the connection
Pick up each handset and press Talk. You should hear a dial tone, and the display should say Talk. (Press Talk again to hang up.)
If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 29).