Included with Your Phone
• Base Unit • Handset • AC Adapter • Rechargeable Battery •Telephone Cord
• This owner’s manual
Replacement adapters, batteries and other parts may be purchased by calling the Customer Hotline at
Terminology
Throughout this manual, terms such as Standby and Talk are used. Below is the terminology explanation.
• Talk - The handset is off the base and [talk] has been pressed, enabling a dial tone.
• Standby - The handset may be sitting on the base charging or out of the base cradle, but is NOT in use. [talk] has not been pressed and there is no dial tone.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line:
Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under the "Accessibility" link. If your call is received outside of our business hours, you can leave us a message and we will call you back.
Installing the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
C. Connect the base unit and charge the handset
D. Mount the base unit on a wall
E. Choose the dialing mode
A. Choose the best location
When choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators, air ducts, and sunlight
Avoid television sets and other electronic equipment
Choose a central location
Avoid noise sources such as a window by a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
Avoid personal computers
Avoid other cordless telephones
•The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch).
•The base and handset should be kept away from sources of electrical noise such as motors and fluorescent lighting.
•The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the base as high as possible.
•The base should be placed in an open area for optimum range and reception.