Jensen JiSS-85 Product Features, Clock Battery Installation, Main Batteries Installation

CAUTION ON SPLASH RESISTANT:

This unit has been constructed to resist mild steam and light splashes from the shower or bath only. It should not be operated under running water and under no circumstances should it be fully immersed in water.

PRODUCT FEATURES

JiSS-85 is a shower radio with docking for iPod which incorporates the following features: - iPod, iPod mini, iPod 1st to 3rd Gen nano, iPod classic and iPod touch Player / Recharger

-2 Band Radio Receiver AM/FM band

-Build-in auxiliary cable to play music from MP3 Player

-LCD display for Digital Clock

-Stereo Headphones Jack for private listening

INSTALLATION

Clock Battery Installation

1.Open the front iPod docking COMPARTMENT DOOR. 2.Lift up the clock battery cover.

3.Remove the plastic battery insulation tab to activate the 1.5V (G13), button cell (included). 4.Replace the clock battery (G13) when the clock display becomes dim.

Main Batteries Installation

1.Open the battery compartment door located at the bottom of the unit.

2.Install 4 x DC1.5V 'C' (UM-2) batteries (not included) in the battery compartment following the polarity markings shown on it. Alkaline batteries are recommended.

3.Replace the battery door on the battery compartment.

NOTE:

1.In order to operate the unit on battery power the DC plug must be disconnected from the DC socket on the back cabinet.

WARNING:

-Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.

-Do not mix old and new batteries.

-Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

-Only batteries of the same or equivalent type as recommend are to be used.

- If the unit is not to be used for an extended period of time, remove the battery.

-Do not dispose of batteries in fire, batteries may explode or leak.

6

INSTALLATION

AC Adaptor Connection

This unit may also be used with the included AC adaptor.

You can charge your iPod only when using the AC adaptor.

1.Firmly insert the DC plug of the adaptor (included) into the DC Jack on the back of the unit.

2.Plug the adaptor's AC plug into your household AC power outlet (120VAC/60Hz). When the AC adaptor is connected to the DC Jack the batteries are automatically disconnected.

Warning: To avoid the risk of electric shock, batteries should only be used when operating this unit in the bathroom or shower. Never use the AC adaptor when operating this unit near water.

Mounting

1.Use the rope provided for hanging of the unit.

2.The detachable stand (included) can be used for desktop application.

7