HOW to Setup JB-199 Client

Notepad program will open with JBConfig.txt file ready for editing.

In the text of JBConfig.txt, look for [System] section.

Within the section, there will be a line:

ip=192.168.1.102; Server IP address

Substitute the IP address in the line with the IP address of JB-199 Server obtained before. For example, if JB-199 Server IP address was 192.168.0.105, modify the line to:

ip=192.168.0.105; Server IP address

After the change has been made, press File button of Notepad program and select Save, and close the file.

6.Restart JB-199 Client.

7.Repeat above steps (1-6) for each JB-199 Client.

WARNING: For steps 2 thru 6, JB-199 Server must be turned on and connected to the Router/Switch at all time.