3HOW TO SETUP JB-199 SERVER
JB-199 Server will come with a golden sticker in the front panel indicating that it is a factory-configured server.
Connect JB-199 Server to a power outlet using the power cord. Be sure to select a correct setting for the POWER Selector (for example, 110V).
Connect JB-199 Server to an Audio Video system (for example, TV) using the AV cable.
Connect JB-199 Server to a Router/Switch using the LAN cable. The Router/Switch should be 100Mbps compatible with the number of ports equal to the number of JB-199 Clients (up to 9) you wish to connect plus 1.
Power on JB-199 Server by pressing the Power button on the front panel. JB-199 Server will boot up to the welcome message.
4HOW TO SETUP JB-199 CLIENT
The following directions are only for JB-199 Client unit that is pre-configured to be a client. For directions in converting your standatd JB-199 to JB-199 Client, refer to the Section: How to Convert JB-199 to JB-199 Client.
Be sure to have JB-199 Server connected as shown in the Section 3: How to Setup JB-199 Server.
Requirements:
Router/Switch with the number of ports equal (or more) to the number of JB-199 Server and Client(s).
PC monitors, mouses and keyboards (two sets or more)