CAVS manual HOW to Convert JB-199 to JB-199 Client

HOW TO CONVERT JB-199 TO JB-199 CLIENT

6. Edit JBConfig.txt.

From JB-199 Server, double click on JB-199Startup.exe icon to restart the JB-199 program. Using the remote control, press Menu and select 1. Jukebox.

Check for the IP address of JB-199 Server and write it down.

WARNING: If IP address in JB-199 Server is shown as 127.0.0.1, then restart the Router/Switch and JB-199 Server. Check for the IP address of JB-199 Server once again.

In JB-199, double click on My Computer - Disk C: - NJB99 - Config, and finally double click on JBConfig.txt.

NOTE: If no such file exists, look for Config.txt.

8

Notepad program will open with JBConfig.txt file ready for editing.

In the text of JBConfig.txt, look for [System] section. In [System] section, append following 2 lines:

network=1 ; 0:off, 1:on(client only) ip=192.168.1.102 ; Server IP address

Substitute the IP address in the line with the IP address of JB-199 Server obtained before. For example, if JB-199 Server IP address was 192.168.0.105, modify the second line to:

ip=192.168.0.105; Server IP address

After 2 lines are appended and new IP address is entered, JBConfig.txt should look as follows (contents and values may vary slightly):

[display]	; 0:full, 1:window mode
window=0
videotype=0	; 0:full, 1:auto size
screen=800,600,32	; defualt=800,600,32
FrameRate=75	; 75 frame/sec
program=0	; 0:normal, 1:RG mode (support)
;
[system]	; default : comm
comm=1,115200,n,8,1
comm2=2,115200,n,8,1	; serial remocon

network=1 ; 0:off, 1:on(client only) ip=192.168.1.102 ; Server IP address*

;

[screen]

...

Press File button of Notepad program and select Save, and close the file.