Panasonic RX-D11 Listening to tapes, Changing the sound quality, Adjusting the deep-bass XBS

3 2

1 4

Listening 1

2

Side to be played facing upward.

Insert the tape with the exposed tape facing you.

3

4

A

B

XBS

12

Listening to tapes

Types of tapes which can be played correctly:

Normal position/TYPE I
High position/TYPE II	✕
Metal position/TYPE IV	✕

High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes.

1	Set [	] to “TAPE/	”.
	Press [L/c STOP/EJECT], load the tape and close
2
	the tape lid.
	Press [- PLAY] to start play.
3
	Adjust the volume.

To stop play:

Press [L/c STOP/EJECT].

To stop play temporarily:

Press [J PAUSE].

To resume play:

Press [J PAUSE] again.

The unit’s power is on in the pause mode. Stop tape to turn the unit off by pressing [L/c STOP/EJECT] when leaving the unit.

To fast-forward or rewind the tape A

Press [( REW/REV] (backward) or [) FF/CUE] (forward) in the stop mode.

Note

Do not press [-PLAY] when rewinding or fast forwarding, as this may jam the tape.

Be sure to press [L/c STOP/EJECT] before the next operation.

To find a particular spot on a tape A

Press [( REW/REV] (backward) or [) FF/CUE] (forward) during playback.

Tape play is resumed when the button is released.

Full auto-stop:

The automatic stop system will release the buttons when the tape reaches the end during play or when recording, fast forwarding or rewinding.

Changing the sound quality

Adjusting the deep-bass (XBS) B

Press [XBS] to boost the bass sounds.

Every time you press the button: XBS ↔ OFF

RQT5210