Panasonic RX-D11 Listening to radio broadcasts, Listening to programmed stations Preset a tuning

2 1 3 2 3 4

Listening	A
	1
	2
	3

4

B

2

Indicates preset scan

3

8

Listening to radio broadcasts

Listening to programmed stations (Preset A tuning)

Make sure you have completed the procedure for “Presetting radio broadcasts” (on page 7).

Preparation: Set [] to “TUNER”.

1	Press [BAND] to select “FM” or “AM”.
	Every time you press the button: FM ↔ AM
	Press [TUNE MODE] to display the preset indicator.
2
	The unit is set to the preset tuning mode.
	Press [–/g] or [f/+] to select the preset channel.
3
	Adjust the volume.
4

RX-D11 only

When using the remote control

1.Press [BAND] to select “FM” or “AM”.

2.Press [3] or [4] to select the preset channel.

Using preset scan B

You can search for a station by listening to all preset channels for 8 seconds each.

Preparation: Set [ ] to “TUNER”.

Do steps 1 to 2 above.

Press and hold [–/g] or [f/+] until “PS” appears on the display.

Preset scan starts.

Press [–/g] or [f/+] when you find the desired channel.

Preset scan ends after searching through each preset channel once. To stop during the process, press [–/g] or [f/+].

RX-D11 only

When using the remote control

Press [3] or [4] for [–/g] or [f/+] described above.

RQT5210