Anti-Shock Function, Maintaining the lens

Anti-Shock Function

The letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section (See page 4.) .

The anti-shock function works by reading audio data and storing it in memory (up to 40 seconds worth). The unit then fills in interruptions caused by bumps and vi- brations with data from the memory. This unit also in- corporates a powerful anti-shock mechanism that prevents skipping caused when play speed is changed by swinging of the unit.

When bumps continue repeatedly

The following indicator appears on the display and sound is interrupted.

DSORRY

A.SHOCK

Note!

≥The anti-shock setting can be changed during play, but this may cause a slight interruption in the sound because the disc’s rotational speed changes.

≥During anti-shock operation, the disc rotates at a high- er rate than usual to collect extra audio data. This could result in a slight increase in disc rotation noise.

Press during play or stop mode.

A.SHOCK	To cancel the anti-shock function
A.SHOCK	Press [A.SHOCK, FM RECEPT, %CITY/NOR] again.
E
FM RECEPT
%CITY/NOR
The following indicator appears on the display.

Using the unit with an audio system

The anti-shock function uses digital signal compression technology. It is recommended that the anti-shock func- tion be canceled if the unit is connected to a home audio system.

A.SHOCK

Using the Unit with Optional

Accessories

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

Using the unit with an audio system

Using the stereo connection cable (not included), you can listen to CDs on your audio system.

≥Turn off the amplifier power and connect the cable.

≥Do not connect the cable to the PHONO jacks on the amplifier.

≥Obtain the optional connecting cable if the amplifier comes with mini-phone jacks.

≥Adjust the volume on the amplifier.

OUT jack

Using the unit with a car audio system

Items to be purchased

For connection to the car audio system:

Car stereo cassette adaptor (SH-CDM10A)

Connect the car stereo cassette adaptor to the unit’s headphone jack. (When doing this, keep the unit’s VOLUME at a setting between 4 and 6.)

If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak deter- gent solution.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instruc- tions that came with the cloth carefully.

Maintaining the lens

Open the lid and clean the lens as shown in the figure. Use a cotton swab to gently wipe off any finger-prints. Recommended product: Lens cleaner kit (SZZP1038C)

Side panel of the unit

Stereo phono cable

(not included)	Amplifier
(not included)
(White)	L
	To CD or AUX
(Red)	R terminals

For securing the unit and connecting the power supply:

≥Car adaptor (SH-CDC9)

≥Car mounting kit (SH-CDF7)

≥Car mounting arm, Car insulator

Note!

≥It may not be possible to use the unit with some types of car stereo owing to restrictions imposed by the con- struction of the car stereo cassette adaptor.

≥Move the unit away from the car adaptor if noise inter- feres with the radio.

For further details, refer to the instructions of the part concerned.

Air blower for camera lens

Lens

RQT5160