Panasonic DMR-EH56 operating instructions Television operation

Television operation

You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television channel and change the television volume.

	DVD	TVÍ
Turn TV on/off	Í			Volume
	DRIVE	CH	VOLUME
	SELECT	AV
				Channel
Input select			PAGE
	1	2 3		Select

CH

4 5 6

1 Point the remote control at the television

While pressing [Í TV], enter the code with the numbered buttons.

e.g., 01:	[0] ➡ [1]	10:	[1] ➡ [0]
Manufacturer and Code No.
Brand	Code	Brand		Code
Panasonic	01/02/03/04/	NOKIA		25/26/27
	45
AIWA	35	NORDMENDE		10
AKAI	27/30	ORION		37
BLAUPUNKT	09	PHILIPS		05/06
BRANDT	10/15	PHONOLA		31/33
BUSH	05/06	PIONEER		38
CURTIS	31	PYE		05/06
DESMET	05/31/33	RADIOLA		05/06
DUAL	05/06	SABA		10
ELEMIS	31	SALORA		26
FERGUSON	10	SAMSUNG		31/32/43
GOLDSTAR/LG	31	SANSUI		05/31/33
GOODMANS	05/06/31	SANYO		21
GRUNDIG	09	SBR		06
HITACHI	22/23/31/40/	SCHNEIDER		05/06/29/
	41/42			30/31
INNO HIT	34	SELECO		06/25
IRRADIO	30	SHARP		18
ITT	25	SIEMENS		09
JVC	17/39	SINUDYNE		05/06/33
LOEWE	07/46	SONY		08
METZ	28/31	TELEFUNKEN		10/11/12/
				13/14
MITSUBISHI	06/19/20	THOMSON		10/15/44
MIVAR	24	TOSHIBA		16
NEC	36	WHITE		05/06
		WESTINGHOUSE

2 Test by turning on the television and changing channels.

≥Repeat the procedure until you find the code that allows correct operation.

≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

[Note]

≥If your television brand has more than one code listed, select the one that allows correct operation.

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products				control
close together.
Use “DVD 1”, the factory set code, under normal circumstances.				remote
1	While stopped
2	Press [FUNCTIONS].			and
	Press [3, 4] to select “To Others”
	press [ENTER].			television
3	and press [ENTER].
	Press [3, 4] to select “Setup” and
4	Press [3, 4] to select “Others” and			your
5	press [1].			match
	Press [3, 4] to select “Remote
6	Control” and press [ENTER].			to
	Press [3, 4] to select the code (“DVD			up
				Set
	1”, “DVD 2” or “DVD 3”) and press
	[ENTER].
		Setup	Remote Control
			Press “±” and “ENTER” together
		Tuning	for more than 2 seconds on the remote
		Disc	control.
		Picture

To change the code on the remote control

7 While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

8 Press [ENTER].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (➡ step 7).

[Note]

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1

(➡ step 7).

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

RQT8415

23