Radio preset tuning, Presetting radio stations

PLAY RE FADER SLEEP EQ ON

1	REC	ALL 1-REC ST
PGM	RANDOM	MONO

PLAY RE FADER SLEEP EQ ON

1	REC	ALL 1-REC ST
PGM	RANDOM	MONO

The Radio: preset tuning

Remote control only

Tuning is simpler if you preset stations.

You can preset 12 FM and 12 AM stations.

Preparation: Tune to the station you want to preset. ( page 13)

Press [PGM/CLEAR].

While “” is flashing

Press the numbered buttons to enter the station into a channel (1 to 12).

•To enter channels 10, 11, and 12 Press [ 10], then the two digits.

•If “” stops flashing Press [PGM/CLEAR] again.

Preparation: Press [TUNER BAND] to select FM or AM.

Press [TUNE MODE] to display “”.

Press [REW/–/ ] or [ /+/FF] to select the channel.

Press the numbered button(s) to select the channel (1 to 12). To select channel 10, 11 or 12, press [≥ 10], then the two digits.

You can search for a station by listening to all preset channels for 8 seconds each.

Preparation: Press [TUNE MODE] to display “”.

■Press and hold [REW/–/ ] or [ /+/FF] until “PS” appears on the display.

Preset scan starts.

Preset scan ends after searching through each preset channel once.

To stop during the process, press [REW/–/	] or [	/
To stop during the process, press [REW/–/	] or [	/
+/FF]

Cancelling a preset channel e.g. If channel 3 is not needed.

Select channel 3.

Press [PGM/ CLEAR] on the remote control. With 10 seconds


Press [REW/–/	] or [		/+/FF] so “-- --” is displayed.
Press [REW/–/	] or [		/+/FF] so “-- --” is displayed.
Press [PGM/ CLEAR] on the remote control.
Now when [REW/–/		] or [		/+/FF] is pressed,


channel 3 is skipped.

The channel can still be selected with the remote control.

RQT5671