Panasonic RX-EX1 Recording CDs, Insert a cassette with the side for recording facing up

PLAY RE FADER SLEEP EQ ON

1	REC	ALL 1-REC ST
PGM	RANDOM	MONO

PLAY RE FADER SLEEP EQ ON

1	REC	ALL 1-REC ST
PGM	RANDOM	MONO

PLAY	RE	FADER	SLEEP	EQ ON
1	REC			ALL 1-REC ST
PGM	RANDOM			MONO
PLAY	RE	FADER	SLEEP	EQ ON
1	REC			ALL 1-REC ST
PGM	RANDOM			MONO

Recording CDs

You can record the whole CD (ALL-REC) or a selected track(1-REC).

ALL-REC

Preparation: Insert a CD ( page 10)

Press [9 TAPE/CD] to switch to CD mode.

Press [CD REC MODE] so “ALL-REC” is dis- played.

Each time the button is pressed

ALL-REC 1-REC OFF

The display shows the length of tape needed.

“C-- -- -- --” indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not

be recorded if the tape isn’t long enough.

Insert a cassette with the side for recording facing up.

	Press [			] to start recording.
	The unit rewinds the tape, records 10 seconds of si-				Recording
	lence, and then starts recording.
To stop recording
Press [		TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side fac-
ing up
Recording and CD pauses.
To record the track again on the opposite side
1. Press [0 TAPE], flip the cassette, and insert it.
2. Press [			].

The unit records 10-second of silence, and resumes re- cording from the beginning of the cut-off track.

To record selected tracks

Program tracks ( steps and on page 12).

Do steps to above.

You cannot use ALL-REC with repeat or random play ( page 11).

1-REC

Preparation: Insert a CD ( page 10) and a cassette. Wind the tape to where you want to start recording.

Press [ TAPE/CD] to switch to CD mode.

Press [CD REC MODE] so “1-REC” is displayed.

Press [REW/–/ ] or [ /+/FF] to select the track you want to record.

Press [] to start recording.

CD play and recording start at the same time.

To stop recording

Press [ TAPE/CD]. The CD also stops.

To record a track in play

Press [CD REC MODE] to display “1-REC”.

Press [	].
Recording starts from the beginning of the track and stops
when the track finishes.
Recording and CD will stop when the tape reaches its end,
		17
even if the track has not finished.

RQT5671