Pioneer S-7EX manual What’s in the box, Features of this speaker system, Before you start

Page 2

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

What’s in the box

• Speaker spikes

• Spike bases x4

(with attached nuts) x4

• Fastening screws

• Caps x10

(for grille) x4

 

 

• Speaker base x1

 

• Grille x1

 

• Operating instructions

Finishing screws (for grille) x4

Features of this speaker system

Construction follows leading-edge TAD technology

Beryllium dual-concentric tweeter

Aramid/carbon fiber reinforced composite 18 cm woofer

Perfect time alignment design

Before you start

The nominal impedance of this speaker system is 6 .

Connect the speaker system to an amplifier with a load impedance ranging from 4 to 16 (a model with “4 – 16 ” displayed on the speaker output terminals).

Do not touch the speaker cones as they are easily damaged.

In order to prevent damage to the speaker system resulting from input overload, please observe the following precau- tions:

Do not supply power to the speaker system in excess of the maximum permissible input.

When connecting or disconnecting anything in your AV system, make sure the amplifier is switched off.

When using a graphic equalizer to emphasize loud sounds in the high-frequency range, do not use exces- sive amplifier volume.

Do not try to force a low-powered amplifier to produce loud volumes of sound (the amplifier’s harmonic distortion will be increased, and you may damage the speaker).

Caution: installation

Do not place the speaker on an unstable surface. It could present a hazard if it falls, as well as damaging the equipment. If placing the speaker on a thick carpet, we

2

En

recommend using the supplied speaker spikes for stability.

Switch off and unplug your AV equipment and consult the instructions when connecting up components. Make sure you use the correct connecting cables.

Do not put a TV or other AV equipment on top of this speaker. It could present a hazard if it falls, as well as damaging the equipment.

Do not install your speakers overhead on the ceiling or wall. If improperly attached, the speaker grille can fall and cause damage or personal injury.

Do not attach these speakers to the wall or ceiling. They may fall off and cause injury.

Caution: in use

Do not use the speaker to output distorted sound for long periods of times. This can result in a fire hazard.

Do not sit or stand on the speaker, or let children play on the speaker.

Do not put large or heavy objects on top of the speaker.

WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm.

Wash hands after handling

D36-P4_A_En

Installing your speaker

Please observe the following points when installing speakers:

This speaker is a bookshelf-type speaker which will give best performance when placed on a solid, level surface off the floor. Placing the speaker directly on the floor will result in boomy, undefined sound. Ideally, the tweeter should be at about ear level when seated in your listening position. We recommend using the CP-7EX speaker stand for optimal sound and stability.

If you choose to use the CP-7EX speaker stand, make sure you secure it with the screws provided.

Sounds played through speaker systems are easily affected in subtle ways by the conditions in the listening space.

For good sound, the speaker should be about 20 cm away from the back wall and at least 50 cm away from the side wall. If the room has a lot of reverberation, we recommend hanging heavy fabric on the walls, and/or putting a carpet on the floor to damp the sound. For best results, cover walls completely.

20 cm 50 cm

Image 2
Contents Page What’s in the box Features of this speaker systemInstalling your speaker Before you startEnglish Using the spikes Connecting to an amplifierUsing the speaker base Connecting the cablesAttaching and removing the front grille Bi-wiring ConnectionsWhen bi-amping Attaching the grilleMagnetic shielding Cleaning the speaker cabinetSpecifications Removing the grilleOnce you have established a comfortable sound level We Want You Listening For a LifetimeTo establish a safe level Decibel Level ExampleCaractéristiques de cette enceinte acoustique Installation des enceintes acoustiquesContenu de l’emballage Avant de commencerUtilisation des pointes de découplage Branchement à un amplificateurUtilisation du socle d’enceinte Branchement des câbles’emploi d’une bi-amplification Fixation et retrait de la grille avantBranchements bifilaires Fixation de la grilleFiche technique Blindage magnétiqueNettoyage du coffret de l’enceinte Dépose de la grilleAntes de comenzar Contenido de la cajaCaracterísticas de estos sistemas de altavoces Instalación del altavozUtilización de los pernos Conexión al amplificadorEmpleo de la base de altavoz Conexión de los cablesCuando se utiliza biamplificación Colocación y extracción de la rejilla frontalBicableado Colocación de la rejillaEspecificaciones Protección magnéticaLimpieza Extracción de la rejilla開始之前 包裝箱中的內容本揚聲器系統的特徵 揚聲器的設置增幅器的連結 前面護網的裝卸 磁性屏蔽 开始使用之前 包装箱内的零部件本扬声器系统的特色 设置扬声器连接到放大器 使用销钉安装或拆卸扬声器架子 双接线连接磁屏蔽 清洁扬声器箱AFTER-SALES Service for Pioneer Products

S-7EX specifications

The Pioneer S-7EX represents a remarkable advancement in speaker technology, delivering an unparalleled auditory experience for music enthusiasts and home theater aficionados alike. This floor-standing speaker is engineered to provide exceptional clarity and depth across the frequency spectrum, making it a perfect choice for those who appreciate high-fidelity sound.

One of the standout features of the Pioneer S-7EX is its proprietary driver technology. It is equipped with a 6.5-inch woofer that employs a rigid, lightweight cone design, allowing it to produce deep, impactful bass without distortion. Coupled with a 5-inch midrange driver, the S-7EX excels in rendering vocal and instrumental nuances, ensuring that every note is heard with precision. The speaker also boasts a 1-inch soft dome tweeter, providing smooth high-frequency response and a natural sound signature that complements the overall sonic profile.

The S-7EX utilizes advanced acoustic engineering techniques, including a finely tuned bass reflex system. This design enhances bass response while minimizing unwanted resonance, resulting in a cleaner, more dynamic performance. The speaker’s cabinet is constructed from dense MDF material, further reducing vibration and enhancing audio fidelity. This attention to detail in both internal components and cabinet design contributes to a rich listening experience, whether for music, movies, or gaming.

Another notable characteristic of the Pioneer S-7EX is its versatility in placement. With an elegant yet unobtrusive aesthetic, it can seamlessly integrate into various home environments. The speaker's compact design makes it suitable for both small and large spaces, allowing users to enjoy high-quality sound without sacrificing style.

Connectivity is also a crucial aspect of the S-7EX. The speakers are designed to work effortlessly with a variety of amplifiers and receivers. Their impedance rating and sensitivity ensure compatibility across a wide range of audio setups, making them an excellent choice for both casual listeners and audiophiles alike.

In summary, the Pioneer S-7EX stands out in the crowded speaker market due to its innovative driver technology, superior acoustic engineering, and elegant design. Whether you are a dedicated music lover or a home theater enthusiast, the S-7EX delivers an immersive audio experience that is truly hard to beat. It embodies Pioneer’s commitment to quality and performance, making it a worthy addition to any audio system.