Pioneer S-7EX manual Magnetic shielding, Cleaning the speaker cabinet, Specifications

Page 5

Removing the grille

1Loosen, then remove the finishing screws from the four corners on the front of the grille.

2After detaching the grille, remove the fastening

screws from the four holes on the front of the speaker.

Optionally, you can insert the supplied caps into the holes.

Do not use a screwdriver (or hex wrench) to tighten the screws. Overtightening could damage the speaker.

When not in use, store the screws with these operating instructions for safekeeping.

Magnetic shielding

This speaker system is magnetically shielded. However, depending on the installation location, color distortion may occur if the speaker system is installed extremely close to the screen of a television set.

If this happens, turn off the television, then turn it on again after 15 min to 30 min. If the problem persists, place the speaker system away from the television set.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to keep the cabinet clean. If necessary, clean with a cloth dipped in a neutral cleanser diluted five or six times with water, and wrung out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit since these will corrode the surfaces.

Specifications

Enclosure

Bass-reflex bookshelf type

 

 

 

(magnetically shielded)

 

Configuration

......................................................................

3-way

English

Woofer

18 cm (71/16 inch) cone 2

 

Tweeter

14 cm (51/2 inch) cone / 3.5 cm (13/8 inch) dome

 

Nominal impedance

6

 

Frequency response

34 Hz to 100 kHz

 

Sensitivity

 

89.5 dB (2.83 V)

 

Maximum input power

200 W

 

Exterior dimensions

 

 

 

.................................

820 (W) mm 291 (H) mm 425 (D) mm

 

 

325/16 (W) in. x 117/16 (H) in. x 163/4 (D) in.

 

Weight

 

39 kg / 86 lbs.

 

Supplied accessories

1

 

Speaker base

 

 

Speaker spikes (with attached nuts)

.............................. 4

 

Spike bases

4

 

Fastening screws (for grille)

4

 

Finishing screws (for grille)

4

 

Caps

 

10

 

Grille

 

1

 

Operating instructions

1

 

Specifications and design subject to possible modifica- tion without notice, due to improvements.

Real, natural wood is used in the construction of the speaker system cabinets. They feature a wonderful color and depth that is much more attractive than plastic veneers and similar materials.

No two pieces of natural wood are exactly alike. Keep this point in mind as you enjoy these speakers.

With the cooperation of AIR Studios, this speaker has been designated AIR Studios Monitor Reference.

is a trademark placed on a product with Pioneer’s Phase Control technology.

This technology enables high-grade sound reproduction through each component by improving overall phase matching.

5

En

Image 5
Contents Page Installing your speaker Features of this speaker systemWhat’s in the box Before you startUsing the speaker base Connecting to an amplifierEnglish Using the spikes Connecting the cablesWhen bi-amping Bi-wiring ConnectionsAttaching and removing the front grille Attaching the grilleSpecifications Cleaning the speaker cabinetMagnetic shielding Removing the grilleTo establish a safe level We Want You Listening For a LifetimeOnce you have established a comfortable sound level Decibel Level ExampleContenu de l’emballage Installation des enceintes acoustiquesCaractéristiques de cette enceinte acoustique Avant de commencerUtilisation du socle d’enceinte Branchement à un amplificateurUtilisation des pointes de découplage Branchement des câblesBranchements bifilaires Fixation et retrait de la grille avant’emploi d’une bi-amplification Fixation de la grilleNettoyage du coffret de l’enceinte Blindage magnétiqueFiche technique Dépose de la grilleCaracterísticas de estos sistemas de altavoces Contenido de la cajaAntes de comenzar Instalación del altavozEmpleo de la base de altavoz Conexión al amplificadorUtilización de los pernos Conexión de los cablesBicableado Colocación y extracción de la rejilla frontalCuando se utiliza biamplificación Colocación de la rejillaLimpieza Protección magnéticaEspecificaciones Extracción de la rejilla本揚聲器系統的特徵 包裝箱中的內容開始之前 揚聲器的設置增幅器的連結 前面護網的裝卸 磁性屏蔽 本扬声器系统的特色 包装箱内的零部件开始使用之前 设置扬声器使用销钉 连接到放大器双接线连接 安装或拆卸扬声器架子清洁扬声器箱 磁屏蔽AFTER-SALES Service for Pioneer Products

S-7EX specifications

The Pioneer S-7EX represents a remarkable advancement in speaker technology, delivering an unparalleled auditory experience for music enthusiasts and home theater aficionados alike. This floor-standing speaker is engineered to provide exceptional clarity and depth across the frequency spectrum, making it a perfect choice for those who appreciate high-fidelity sound.

One of the standout features of the Pioneer S-7EX is its proprietary driver technology. It is equipped with a 6.5-inch woofer that employs a rigid, lightweight cone design, allowing it to produce deep, impactful bass without distortion. Coupled with a 5-inch midrange driver, the S-7EX excels in rendering vocal and instrumental nuances, ensuring that every note is heard with precision. The speaker also boasts a 1-inch soft dome tweeter, providing smooth high-frequency response and a natural sound signature that complements the overall sonic profile.

The S-7EX utilizes advanced acoustic engineering techniques, including a finely tuned bass reflex system. This design enhances bass response while minimizing unwanted resonance, resulting in a cleaner, more dynamic performance. The speaker’s cabinet is constructed from dense MDF material, further reducing vibration and enhancing audio fidelity. This attention to detail in both internal components and cabinet design contributes to a rich listening experience, whether for music, movies, or gaming.

Another notable characteristic of the Pioneer S-7EX is its versatility in placement. With an elegant yet unobtrusive aesthetic, it can seamlessly integrate into various home environments. The speaker's compact design makes it suitable for both small and large spaces, allowing users to enjoy high-quality sound without sacrificing style.

Connectivity is also a crucial aspect of the S-7EX. The speakers are designed to work effortlessly with a variety of amplifiers and receivers. Their impedance rating and sensitivity ensure compatibility across a wide range of audio setups, making them an excellent choice for both casual listeners and audiophiles alike.

In summary, the Pioneer S-7EX stands out in the crowded speaker market due to its innovative driver technology, superior acoustic engineering, and elegant design. Whether you are a dedicated music lover or a home theater enthusiast, the S-7EX delivers an immersive audio experience that is truly hard to beat. It embodies Pioneer’s commitment to quality and performance, making it a worthy addition to any audio system.