Setting the calendar year, date and month

3Press the MODE button once, the current time will flash. You must adjust the time whilst the clock display is flashing. Repeatedly press the UP or DOWN buttons to change the time by 1 minute increments. Or hold down UP or DOWN buttons to change the clock rapidly. The minutes will carry over to the hours if, for example, the minutes change from 59 to 00 the hour will increment by 1.

4The PM symbol will appear to indicate 12:00 midday has been reached.

5Press the MODE button to confirm settings. The date will then flash. Either press mode another 4 times for normal operation or set the date (see below) or wait for 15 seconds.

If no button is pressed for 15 seconds, the time is stored automatically and returns to the original display.

Setting the calendar (year, date and month)

1Press MODE twice. The calendar will flash.

2Repeatedly press the UP or DOWN buttons to the change the date in 1-day increments. Hold UP or DOWN buttons to change the date by 10-day increments. If the UP or DOWN buttons are held down for more than 10 seconds, the date will change by 30 day increments.

If no button is pressed for 15 seconds, the date is stored automatically and returns to the original display.

Note: The date will carry over to the month if, for example, the date changes from the last day of the month to the 1st, the month will increment by 1. If the month changes from Dec to Jan, the left most 4 digits will increase to the next year.

3Press the MODE button to store the calendar setting. The ALARM 1 time will then flash. Either press the MODE button another 3 times or set the ALARM 1 time (see section entitled ‘setting the alarms’) or wait for 15 seconds.