Listening to radio
1Press the RADIO ON / BAND button to switch on the radio.
2Press the RADIO ON / BAND button to select FM, MW.
3Press the UP or DOWN buttons to manually set to your desired station.
4Adjust the VOLUME control to your desired listening level.
FM wire aerial
To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the cd clock radio.
Automatic station search
1Press and hold the UP button until ‘UP’ is displayed on the display panel and it will automatically search up the radio frequency.
2Press and hold the DOWN button until ‘DN’ is displayed and it will automatically search down the frequency.
Radio presets
1Refer to ‘listening to the radio’ to tune to the desired radio station.
2To store the frequency into the memory, press PRESET / SET button, the preset station number will be automatically assigned the next available number and will appear on the display.
3Press the PRESET / RECALL to select another preset location.
4Press PRESET / SET to confirm your settings.
Radio frequency tips
•There is a maximum of 11 (10 preset locations and 1 alarm memory location) preset stations that can be stored.
•You can also overwrite preset station numbers by pressing PRESET / SET button when listening to the chosen station. Press the PRESET / RECALL button to select the preset to be overwritten and then press PRESET / SET again to confirm.
8