Troubleshooting
| Symptom | Possible Problem | Solution |
| No AM band radio | AM loop antenna is not connected to the unit | Plug the AM loop antenna connector to the jack on the back of the unit |
| sound but others OK |
|
|
| AM/FM radio is very | AM/FM antenna isn’t located properly | Move the AM loop antenna away from the main unit and rotate it for |
| noisy |
| best reception. Keep unit and antennas at least 3 feet away from AC |
|
|
| adaptor. |
| Unit makes odd | GSM noise: iPhone is sending signals to cell | Undock your iPhone or put iPhone in Airplane mode. Note that |
| beeping noise in radio | towers | Airplane temporarily disables the phone features on the iPhone. |
| mode |
|
|
| Sound is distorted | Volume level is set too high | Decrease the volume |
|
| Sound source is distorted | If the iPhone/iPod original sound source (MP3) is old or of poor |
|
|
| quality, distortion and noise are easily noticed with |
|
|
| speakers. Try a different audio source such as a music CD. |
|
|
| If you are using an external sound source like older generation of iPod |
|
|
| or iPod Shuffle, try reducing the output volume on the device itself. |
|
|
| Also try turning bass boost OFF. |
|
| EQ settings are too high | Lower EQ settings and/ or turn off SRS WOW |
|
|
|
|
| Unit/adaptor gets | This is normal | Turn unit off for awhile or lower volume |
| warm after extended |
|
|
| play at high volume |
|
|
|
|
|
|
| Can't hear | Line out jack is not meant for headphones. | The signal from the line out jack needs amplification. Use powered |
| headphones/speakers | Speakers need a power source | speakers/monitors or other amplified audio device. |
| attached to line out jack |
|
|
| Snooze time | Custom snooze time not set | Press and hold Snooze button then turn set wheel to adjust |
| is too long/short |
|
|
|
|
|
|
| Can’t wake to playlist | Playlist is misnamed or empty | Sync iPhone/iPod to iTunes and manually label playlist iHome. Make |
|
|
| sure to add songs to your playlist. For help in creating a playlist, please |
|
|
| see the Help tab in iTunes or visit www.apple.com |
| Alarm not working | AM/PM time/alarm time not set correctly | When setting clock or alarm time, take note of the PM indicator; there |
|
|
| is NO AM indicator |
|
| Alarm time or source selected for alarm 2 , not | Make sure to set the alarm time and source for the alarm icon 1 or 2 |
|
| alarm 1 or vice versa | that is shown on the clock display |
|
| 7 days is the every day alarm, 5 days is | |
|
| ||
|
|
| |
|
| Calendar is not set correctly, which can affect | See page 4 for setting Clock/Calendar Section. |
|
| 7/5/2 day alarm operation |
|
|
|
|
|
8