BEFORE SWITCHING OFF THE POWER
When you have finished using the CD player, before switching off the power, ensure that the disc is ejected
Do not switch off the power when the disc in the loader.
POWER OFF
Switch off the power after the disc is ejected.
POWER OFF
TROUBLESHOOTING GUIDE
If difficulties arise with your compact disc player, locate the apparent problem in the
1.Is the compact disc player properly connected to the amplifier?
2.Is the amplifier set for the proper operation?
3.Have the operating instructions for the compact disc player been followed?
Symptom | Possible Cause | Corrective Action | |
The power fails to switch on |
|
| |
when the POWER switch is set | Poor power plug connection at the AC outlet. | Insert the power plug firmly into the AC outlet. | |
to ON |
|
| |
Disc play does not start | The disc is loaded upside down. | Reload the disc with the label side up. | |
The disc is too dirty. | Clean the disc. | ||
| |||
| Improper output cable connections. | Connect the output cable properly. | |
No sound | Make sure that the amplifier controls are set | ||
Improper amplifier operation. | |||
| properly. | ||
|
| ||
Sound skips | The CD player is subject to vibrations or | Change the installation location. | |
physical shock. |
| ||
|
| ||
Hum | Loose cable connections. | Firmly connect all audio plugs. |
- 14 -