Param Eter Setting Instruction

NOTE :

1. BK/START_T : The period time before starting music

2. BK/STOP_T : The period time before stopping music

3. PS/BPM_SYNC: Add the PHASER effect to the music in a cycle based upon the selected beat

4. PS/GAIN: Determine the volume of PHASER effect signal. The higher ratio with stronger effect.

5. PS/TIME: Determine the length of PHASER effect. SYNC-OFF,

0.25sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4 beat is the shortest and 64 beats is the longest.

6.FG/BPM_SYNC: Add the FLANGER effect to the music in a cycle based upon the selected beat

7.FG/GAIN: Determine the volume of FLANGER effect signal. The higher ratio with stronger effect.

8.FG/TIME : Determine the length of FLANGER effect. SYNC-OFF,

0.25sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4 beat is the shortest and 64/1 beats is the longest.

9.EC/BPM_SYNC: Add the ECHO effect to the music in a cycle based upon the selected beat

10.EC/GAIN: Determine the volume of ECHO effect signal. The higher ratio with stronger effect.

11.EC/DELAY_LG: The delay time of ECHO effect. SYNC OFF,

0.01sec is the shortest, and 4 sec is longest; SYNC_ON, 1 beat is the shortest and 4/1 beats is the longest.

12.FL/BPM-SYNC:Add the FILTER effect to the music in a cycle based upon the selected beat

13.FL/SCAN_TIME (FL/BPM-SYNC:ON): Determine the scanning time of FILTER effect. 1/4 beat is the shortest and 64/1 beats is the longest

14.FL/FREQUENCY(FL/BPM-SYNC:OFF) : Select the band of frequency. The number increased, The frequency is close to the treble. The number decrease, The frequency is close to bass.

15. FL/GAIN: Determine the volume of FILTER effect signal. The higher ratio with stronger effect.

16. PAN/BPM_SYNC: Add the PAN effect to the music in a cycle based upon the selected beat

17. PAN/MIX : Determine the volume of signal taken for mixing to the other side.

18. PAN/PERIOD: Determine the period of PAN effect. SYNC-OFF,

0.06sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64 beat is the shortest and 4/1 beats is the longest.

19.CP/BPM_SYNC: Add the CHOP effect to the music in a cycle based upon the selected beat

20.CP/WIDTH : Determine the ratio of auditable music, the higher ratio with more audible signal.

21.CP/PERIOD : Determine the period of CHOP effect. SYNC-OFF,

0.06sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64 beat is the shortest and 4/1 beats is the longest.

22.SPL/MIX_VOL: The ratio of SAMPLE single mixing into the music.

23.SPL/PITCH: To select the sample pitch range from –100% to +100%, 0% means sample playback speed is unchanged.

24.SPL/LOOP_SW: To play the sample music repeatedly

25.SPL/REVERSE: To play the sample music backward to mix with music.

26.SPL/INSERT : To cut off the music and insert the sample music.

27.KEY_SEMITONE : SEMITONE_ON, to change the key by half step, from +12 to –24 key; SEMITONE_OFF, change the key by percentage from –100% to +100%.

- 8 -