Pioneer DJm-909 operating instructions Automatic Mode BPM Counting, Touch panel main

BPM COUNTING

Automatic Mode BPM Counting

This function automatically counts the track’s speed in BPM (Beats Per Minute), displaying the results as a numerical value. The functions does not merely count the bass beat, but uses a computer to calculate the track’s original BPM required by the DJ. The display provides a visual standard in addition to the human ear, thus allowing the DJ to quickly match two tracks possessing differing speeds.

When auto mode is used to count BPM, the calculated BPM value is displayed on the LCD panel, allowing quick matching of tracks with differing speeds. (Counting range: 70.0 to 180.0 BPM)

The display flashes during BPM counting.

*Some tracks may not be counted properly, in which case manual count should be used.

(See page 11, top panel items 44, 51)

Touch panel (main page)

7Selecting Auto Mode

1.Press the FX ADJ. button to cause the touch panel screen to display the effect parameter

adjust menu.

If the CH-1 FX ADJ. button is pressed, the CH-1 display appears; if the CH-2 FX ADJ. button is pressed, the CH-2 display appears.

BANK 1 BANK 1

		ECHO
	BANK 2		BANK 2
	CH1	TAP	TIME FOOT
		1 2 0BPM	2 0 0 0 ms
	BANK 3		BANK 3
	FX ADJ.		FX ADJ.
1	FADER		FADER
	CURVE		CURVE

AUTO lights in auto mode.

BPM value display

EDIT 1 CH FOOT	EDIT 2 CH
TIME 2 0 0 0 ms	PICH	0 %
LOW MID HI	LOW MID HI
AUTO 1 2 0BPM	TAP	1 2 0BPM

BPM value display

TAP lights during manual count mode (TAP button input)

BANK	BANK
EDIT	EDIT

2.Press the BPM TAP button (displayed in manual mode), to display the BPM AUTO button.

BANK 1 BANK 1

	ECHO
BANK 2		BANK 2
CH1	TAP	TIME FOOT
	1 2 0BPM	2 0 0 0 ms
BANK 3		BANK 3

¶The BPM value can be input directly by rotating the TIME/SELECT dial while holding the TAP button depressed.

FX ADJ.	FX ADJ.
FADER	FADER
CURVE	CURVE
BANK	BANK
EDIT	EDIT
	2

16

<DRB1349>