Pioneer DJm-909 operating instructions Fader Operations, Cross fader start play and back cue play

Page 18

FADER OPERATIONS

Cross fader start play and back cue play

When the CH-1 CD player is held in standby at the cue point, merely moving the cross fader lever from the right (CH-2) side to the left (CH-1) side will cause the CH-1 CD player to begin playback.

When the cross fader lever reaches the left (CH-1) side, CH-2 CD player performs back cue (returns to its cue point). Likewise, when the CH-2 CD player is in standby at its cue point, moving the cross fader lever from the left (CH-1) side to the right (CH-2) side causes CH-2 CD player to begin playback. When the cross fader lever reaches the right (CH-2) side, CH-1 CD player performs back cue.

*Back cue is performed even if the input selector switch is not set to CD.

Start playback with channel fader

1To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [CH-1] or [CH-2] position.

When using the CH-1 fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [CH-1] position; when using the CH-2 fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [CH-2] position.

FADER START

C.F. 1 CH-1 C.F. 2 CH-2

÷If the cue point has already been set, there is no need to set the CD player again for standby at the cue point.

÷After playback has once begun, moving the channel fader lever back to the “0” scale mark will cause the CD player to return to its cue point and enter the standby mode again (back cue).

Start playback with cross fader

1To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [C.F.1] or [C.F.2] position.

When using cross fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [C.F.1] position; when using the cross fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [C.F.2] position.

FADER START

C.F. 1 CH-1 C.F. 2 CH-2

2Press the top panel FADER START button so that the indicator lights.

When the CH-1 FADER START button is pressed, the C.F.1 FADER START indicator lights.

When the CH-2 FADER START button is pressed, the C.F.2 FADER START indicator lights.

2Press the top panel FADER START button so that the indicator lights.

When the CH-1 FADER START button is pressed, the CH-1 FADER START indicator lights.

When the CH-2 FADER START button is pressed, the CH- 2 FADER START indicator lights.

3Move the cross fader lever to the side opposite from the channel you wish to start.

4Adjust the CD player to its cue point and set for

cue point standby.

5Begin moving the cross fader lever with the timing you wish, thereby beginning playback on the CD player.

3Set the channel fader lever to the [0] scale mark.

4 Adjust the CD player to its cue point and set for cue point standby.

5 Begin moving the channel fader lever with the timing you wish, thereby beginning playback on the CD player.

FADER START

C.F.1 FADER START

REVERSE

FADER START

REVERSE REVERSE

FADER START

1

2

FEELING ADJ.

CH-1CH-2

 

10

 

9

 

8

 

7

 

6

 

5

CH-1 FADER START

4

 

3

 

2

 

1

 

0

10

9

8

7

6

5

4CH-2 FADER START

÷If the cue point has already been set, there is no need to set the CD player again for standby at the cue point.

÷If the cross fader lever is moved fully after the beginning of playback, the opposite channel’s CD player will return to its cue point and enter standby there (back cue).

18

<DRB1349>

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DJM-909 DRB1349 Important Notice Contents FeaturesConnections Checking AccessoriesConnecting Input Components MICConnecting Foot Switch and Headphones front panel Output ConnectionsConnections Part Names and Functions Top PanelDJM-909 BOOTH/SESSION OUT Part Names and Functions24 CH-1 Fader Start indicator 22 CH-1 Reverse indicator32 CH-2 Reverse indicator 25 C.F.1 Fader Start indicator38 CH-1 effect bank buttons and indicators Bank 1, 2 39 CH-1 effect parameter adjust button FX ADJTouch Panel 45 CH-2 effect bank buttons and indicators Bank 1, 2 43 CH-1 effect switch and indicator Effect Lock ON/OFF/ON49 CH-2 effect mix ratio/depth adjust dial MIX/DEPTH 50 CH-2 effect switch and indicator Effect Lock ON/OFF/ONFront Panel Rear Panel 73 72Touch Panel Display Contents Touch Panel Display Selection BankBPM Counting Automatic Mode BPM CountingAuto lights in auto mode BPM value display Touch panel mainAdjusting Fader Lever Operating Sensation Fader OperationsFader Start Function Fader Operations Cross fader start play and back cue playBeat Effector effects linked to BPM Effect FunctionsTypes of Effects Name Function FX ADJ. Parameter touch panelEffect Functions Fader Effector effects linked to channel or cross fader Use the MIX/DEPTH dial to set the roll sound level Using the Effect FunctionsSet Effect switch to on or Lock on Use touch panel’s Cross Fader button to select faderPresetting Effects Change the effectLeave the effect selection Bank Edit menu Effect Parameters Beat effectsTouch PHASER1 Fader effectsFader Multi TAP Block Diagram MICTroubleshooting Problem Possible Cause CountermeasurePhono Audio Section SpecificationsAccessories Electrical Section, etc
Related manuals
Manual 28 pages 31.57 Kb

DJm-909 specifications

The Pioneer DJM-909 is a professional-grade DJ mixer that has gained the admiration of both amateur and seasoned DJs alike. Known for its versatile features and innovative technologies, the DJM-909 stands out for its exceptional performance capabilities and user-friendly design.

One of the most appealing aspects of the DJM-909 is its multi-channel setup, which includes four input channels. This allows DJs to mix multiple audio sources, including turntables, CD players, or digital audio interfaces, providing endless creative possibilities. The mixer is also equipped with dual effects processors, enabling real-time audio manipulation without the need for external devices. DJs can easily layer effects over different channels, enhancing their set's depth and creativity.

The DJM-909 features high-quality digital signal processing (DSP) that ensures wood-clear sound reproduction. Its built-in 24-bit/96 kHz audio interface delivers superior audio quality, making it suitable for both live performances and studio recordings. Additionally, the mixer incorporates a comprehensive EQ section with three bands per channel, allowing DJs to fine-tune their sound with precision.

One of the standout features of the DJM-909 is the powerful built-in effects engine. It includes a wide variety of effects such as delay, reverb, and flanger, which can be easily applied and manipulated in real time. The dedicated effects send/ return loop enables DJs to introduce their favorite external effects units seamlessly.

The design of the DJM-909 caters to ease of use, featuring a layout that ensures quick access to essential controls. The large, colorful LED meters allow DJs to monitor levels easily, avoiding any potential clipping during performances. The intuitive interface is complemented by high-quality faders that provide smooth and precise control over mixing and transitions.

Another significant aspect of the DJM-909 is its MIDI capability, allowing DJs to synchronize their setups with software or external MIDI devices. This feature opens doors for complex setups involving software like Ableton Live, creating a hybrid DJ performance that integrates live elements with pre-recorded tracks.

In conclusion, the Pioneer DJM-909 is more than just a DJ mixer; it is a powerful tool that empowers DJs to express their creativity and take their performances to new heights. With its robust feature set, superior audio quality, and intuitive design, it remains a favorite choice for many music professionals around the world. The DJM-909 exemplifies Pioneer DJ's commitment to innovation, making it a must-have for any serious DJ looking to elevate their sound.
Top Page Image Contents