Pioneer DJm-909 operating instructions Fader Effector effects linked to channel or cross fader

Page 21

 

 

 

EFFECT FUNCTIONS

 

 

 

Fader Effector (effects linked to channel or cross fader)

 

 

 

 

 

 

Name

Function

FX ADJ. Parameter (touch panel)

 

 

 

 

36

FADER ROLL (*2)

EFFECT switch turn ON or fader position is

Select either channel fader or cross fader.

 

 

used as trigger to record input sound, and

Set base ROLL time to 1/2, 1/1, or 2/1.

 

 

then output the sound repeatedly within

 

 

 

range of 1/1 to 1/16 beat.

 

 

 

 

 

37

FADER MULTI TAP DELAY

At preset intervals repeat sound is output at

Select either channel fader or cross fader.

 

(*1)

1/1 to 1/16 beat set with fader.

Set basic beat time of 1/2 to 2/1 for each BPM beat, and

 

 

 

set delay pattern selection.

 

 

 

 

38

FADER TRANS PAN

In time with the BPM, long-period PAN

Select either channel fader or cross fader.

 

 

output is cut at time corresponding to fader

Set PAN operation period and basic effect time to be cut

 

 

position.

with fader.

 

 

 

 

39

FADER PITCH SHIFTER

In response to fader position, pitch of input

Select either channel fader or cross fader.

 

 

sounds is changed.

Set type of pitch change.

 

 

 

 

40

FADER RING

Produces metallic bass sound effect.

Select either channel fader or cross fader.

 

 

 

Set frequency of sound effect.

 

 

 

 

41

FADER VOCODER1

Vocoder effect; modulates internal oscillator

Select either channel fader or cross fader.

 

 

sound in response to input sound. Depending

Set code type.

 

 

on fader position, changes internal oscillator

 

42 FADER VOCODER2

 

sound’s fundamental frequency. 7 code

 

 

 

 

 

 

sounds can be added.

 

 

 

 

 

43

FADER FILTER (LPF)

Changes low-pass filter’s cutoff frequency,

Select either channel fader or cross fader.

 

 

depending on fader position.

 

 

 

 

 

44

FADER FILTER (HPF)

Changes high-pass filter’s cutoff frequency,

Select either channel fader or cross fader.

 

 

depending on fader position.

 

 

 

 

 

45

FADER FILTER (BPF)

Changes band-pass filter’s center frequency

Select either channel fader or cross fader.

 

 

depending on fader position.

 

 

 

 

 

46

FADER FLANGER

Changes frequency band subjected to flanger

Select either channel fader or cross fader.

 

 

effect, depending on fader position.

 

 

 

 

 

47

FADER PHASER

Changes frequency band subjected to phaser

Select either channel fader or cross fader.

 

 

effect, depending on fader position.

Set number of filter stages producing phase effect.

 

 

 

Greater numbers of stages produce deeper effects.

 

 

 

 

48

FADER SYNTHE1

Outputs sine wave sound source.

Select either channel fader or cross fader.

 

 

 

Select frequency equivalent to note “DO”.

 

 

 

 

49

FADER SYNTHE2

Outputs sawtooth wave sound source.

Select either channel fader or cross fader.

 

 

 

Select frequency equivalent to note “DO”.

 

 

 

 

50

FADER SYNTHE3

Outputs square wave sound source.

Select either channel fader or cross fader.

 

 

 

Select frequency equivalent to note “DO”.

 

 

 

 

(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor SELECT switch is set to the [EFFECT] position.

(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT] position.

21

<DRB1349>

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DJM-909 DRB1349 Important Notice Features ContentsConnecting Input Components Checking AccessoriesConnections MICConnecting Foot Switch and Headphones front panel Output ConnectionsConnections Part Names and Functions Top PanelDJM-909 Part Names and Functions BOOTH/SESSION OUT32 CH-2 Reverse indicator 22 CH-1 Reverse indicator24 CH-1 Fader Start indicator 25 C.F.1 Fader Start indicator38 CH-1 effect bank buttons and indicators Bank 1, 2 39 CH-1 effect parameter adjust button FX ADJTouch Panel 49 CH-2 effect mix ratio/depth adjust dial MIX/DEPTH 43 CH-1 effect switch and indicator Effect Lock ON/OFF/ON45 CH-2 effect bank buttons and indicators Bank 1, 2 50 CH-2 effect switch and indicator Effect Lock ON/OFF/ONFront Panel 73 72 Rear PanelTouch Panel Display Contents Bank Touch Panel Display SelectionAuto lights in auto mode BPM value display Automatic Mode BPM CountingBPM Counting Touch panel mainAdjusting Fader Lever Operating Sensation Fader OperationsFader Start Function Cross fader start play and back cue play Fader OperationsTypes of Effects Effect FunctionsBeat Effector effects linked to BPM Name Function FX ADJ. Parameter touch panelEffect Functions Fader Effector effects linked to channel or cross fader Set Effect switch to on or Lock on Using the Effect FunctionsUse the MIX/DEPTH dial to set the roll sound level Use touch panel’s Cross Fader button to select faderPresetting Effects Change the effectLeave the effect selection Bank Edit menu Beat effects Effect ParametersTouch PHASER1 Fader effectsFader Multi TAP MIC Block DiagramTroubleshooting Problem Possible Cause CountermeasurePhono Accessories SpecificationsAudio Section Electrical Section, etc
Related manuals
Manual 28 pages 31.57 Kb

DJm-909 specifications

The Pioneer DJM-909 is a professional-grade DJ mixer that has gained the admiration of both amateur and seasoned DJs alike. Known for its versatile features and innovative technologies, the DJM-909 stands out for its exceptional performance capabilities and user-friendly design.

One of the most appealing aspects of the DJM-909 is its multi-channel setup, which includes four input channels. This allows DJs to mix multiple audio sources, including turntables, CD players, or digital audio interfaces, providing endless creative possibilities. The mixer is also equipped with dual effects processors, enabling real-time audio manipulation without the need for external devices. DJs can easily layer effects over different channels, enhancing their set's depth and creativity.

The DJM-909 features high-quality digital signal processing (DSP) that ensures wood-clear sound reproduction. Its built-in 24-bit/96 kHz audio interface delivers superior audio quality, making it suitable for both live performances and studio recordings. Additionally, the mixer incorporates a comprehensive EQ section with three bands per channel, allowing DJs to fine-tune their sound with precision.

One of the standout features of the DJM-909 is the powerful built-in effects engine. It includes a wide variety of effects such as delay, reverb, and flanger, which can be easily applied and manipulated in real time. The dedicated effects send/ return loop enables DJs to introduce their favorite external effects units seamlessly.

The design of the DJM-909 caters to ease of use, featuring a layout that ensures quick access to essential controls. The large, colorful LED meters allow DJs to monitor levels easily, avoiding any potential clipping during performances. The intuitive interface is complemented by high-quality faders that provide smooth and precise control over mixing and transitions.

Another significant aspect of the DJM-909 is its MIDI capability, allowing DJs to synchronize their setups with software or external MIDI devices. This feature opens doors for complex setups involving software like Ableton Live, creating a hybrid DJ performance that integrates live elements with pre-recorded tracks.

In conclusion, the Pioneer DJM-909 is more than just a DJ mixer; it is a powerful tool that empowers DJs to express their creativity and take their performances to new heights. With its robust feature set, superior audio quality, and intuitive design, it remains a favorite choice for many music professionals around the world. The DJM-909 exemplifies Pioneer DJ's commitment to innovation, making it a must-have for any serious DJ looking to elevate their sound.
Top Page Image Contents