Replacing iH24 Backup Battery

Install/Replace Backup Battery

The iH24 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Backup Battery Low Icon located on the right of the display is flashing, it is time to replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement.

Open the battery compartment cover located on the back of the unit.

Insert 1 “CR2032” battery with the + facing out. Replace battery compartment cover.

Battery install for

Clock display back up

Install/Replace Batteries for Portable Use

The iH24 uses 4 “AA” batteries for portable playing. If sound becomes weak or distorted while operating on batteries, it’s time to replace the batteries.The iH24 will not charge iPod while operating on batteries.

• Open the battery compartment cover located on the bottom of the unit.

• Insert 4 AA (LR) batteries in the compartment as indicated, making sure the polarity (+ and -) matches the diagram.

• Replace battery compartment cover.

Batteries information:

• Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.