Quick Start Connections | iHome iH70 guide

Quick Start: Connections

1:power

2:connections 3:inserts

Attach the AC adaptor cable to the jack on the back of the left speaker and plug the other end into a working wall socket.

1)Connect the left and right speaker using the included speaker cable. The arrows on the plugs should face upwards.

2)Connect the USB cable to the left speaker and a powered USB port on your computer.

3)Connect the computer audio cable to the audio out jack on your computer and to the computer jack

(marked “to computer”) on the iH70 to listen to computer audio.

Select the dock insert for your iPod model from the table below and place insert in dock.

Never dock an iPod without an insert in place.

Use this insert	thin iPod with video (30 GB)	iPod with video (60,80 GB)	3rd Gen nano	iPod Touch
	Insert 9	Insert 10	insert 13	insert 14
For this iPod	thin (30 GB) iPod with video	thick (60, 80 GB) iPod with video	3rd Gen nano	iPod Touch
	thin (80GB) iPod classic	thick (160 GB) iPod classic

NOTE: If the insert for your iPod isn’t listed, please visit an Apple store or www.ihomeaudio.com

to purchase the proper insert.

4:iPod	Insert iPod into dock with		5:stand
	proper insert (iPod must not
	be in a skin or case). iPod
	will charge while docked.
	Press the Power button on
	the	iH70 then press
	play/pause button on your
	iPod	to play the iPod.

The iH70 has pull out “feet” (stands) on the back of each speaker for added stability. Grip the stands and pull outward for use. Press back under speaker body when not needed.