Manual tuning - DAB
Manual tuning allows you to tune your radio to a particular DAB frequency in Band III. Any new stations found will be added to the station list. This function can also be used to assist the positioning the aerial or the radio to optimise reception for a specific channel or frequency. Note that UK DAB stations are located in the range of channels 11B to 12D.
1.Press and release the Menu button so that the display shows "MANUAL". Press and release the Select button to enter the manual tuning mode.
2.Press the Tuning Up or Down buttons to select the desired DAB channel. Press and release the Select button to tune to the chosen frequency.
3.If a signal is present, this will be indicated on a signal strength display. The minimum signal marker (
) shows the minimum signal strength needed for good DAB reception. The signal indicator chevrons go up or down showing the changing signal strength as you adjust the wire aerial or your clock radio position. Press and release the Select button again to return to the normal DAB tuning mode.
1
2
2
Signal strength display - DAB
1. Press and release the Select button to show the signal strength |
|
display. The minimum signal marker ( ) shows the minimum signal |
|
strength needed for good DAB reception. The signal indicator chevrons |
|
increase or decrease showing the changing signal strength as you |
|
adjust the wire aerial or your clock radio position. | 1,2 |
|
2.Press and release the Select button to return to the normal radio display.
If you need any further advice, please call our Technical Helpline on :- | 12 |
020 8758 0338 |