BDISPLAY Setting
You can change the Display functions. Follow steps 1 to 2 on page 14.
3 Select the desired item. | 4 Select the desired setting. |
| TV ASPECT: (Default: 4:3 LETTER BOX) |
See note on the left.
ENTER
DISPLAY_TV ASPECT |
|
|
TV ASPECT | 4:3 LETTER BOX | 4:3 LETTER BOX |
STILL MODE | 4:3 PAN & SCAN | 4:3 PAN & SCAN |
PROGRESSIVE | 16:9 WIDE | 16:9 WIDE |
ENTER
DISPLAY menu
(Default: AUTO)
|
|
| See note on the left. |
DISPLAY_TV ASPECT | |||
TV ASPECT | 4:3 LETTER BOX | DISPLAY_STILL MODE |
|
| |
STILL MODE | 4:3 PAN & SCAN | TV ASPECT | AUTO | AUTO | |
PROGRESSIVE | 16:9 WIDE | ||||
STILL MODE | FIELD | FIELD | |||
|
| PROGRESSIVE | FRAME | FRAME |
ENTER
Select the desired setting.
ENTER
Select the desired setting.
ENTER
ENTER
ENTER
5To exit
“TV ASPECT” or
“STILL MODE” menu
SETUP
To complete
“PROGRESSIVE” setting
ENTER
Notes:
TV ASPECT:
PROGRESSIVE: (Default: OFF)
See note on the right.
Select “ON”.
• Select “4:3 LETTER BOX”, so that |
black bars may appear on the top |
and bottom of the screen. |
• Select “4:3 PAN & SCAN” for a full |
height picture with both sides |
adjusted. |
• Select “16:9 WIDE” if a |
TV is connected to this unit. |
STILL MODE:
•Select “AUTO” usually.
•If you select “AUTO”, it automatically selects the best resolution setting (“FRAME” or “FIELD”) based on the data characteristics of the pictures. (default)
•If you select “FIELD”, the picture in the still mode will be stabilized.
•If you select “FRAME”, the picture in the still mode will be highly defined.
•An individual picture on TV screen is called a “frame”, which consists of two separate images called as “field”.
•Some pictures may be blurred if you select “AUTO” in the still mode due to their data characteristics.
DISPLAY_PROGRESSIVE
TV ASPECT | OFF |
STILL MODE | ON |
PROGRESSIVE |
|
If there is no picture or you do not press any buttons for 15 seconds,
“PROGRESSIVE” will switch to “OFF” and it will exit the “SETUP” menu.
OFF
ON
ENTER
Before proceeding…
1.Make sure your TV has progressive scan.
2.Connect with component video cable
NOTE: If there is no picture or picture is distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
A c t i va t e P r o g r e s s ive ? | NO | |
|
| YES |
SELECT: K / L | SET:ENTER |
|
Confirm again to use progressive scan. If Picture is good, select ‘YES’.
NO
YES
SELECT: K / L SET:ENTER
SETUP
ENTER
Select “Yes”.
ENTER
ENTER
Select “Yes”.
ENTER
DVD FUNCTIONS
Notes:
PROGRESSIVE:
•You can set “PROGRESSIVE” to “OFF” in “DISPLAY” menu or press and hold [B (PLAY)] on the front of the unit for more than 5 seconds during playback, so that the P- SCAN indicator on the front panel turns Off.
•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT jack will be distorted or not be output at all.
CAUDIO Setting
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on page 14.
3 Select the desired item. | 4 Select the desired setting. |
|
|
|
|
|
|
|
|
| 5 To exit the menu | ||||||
| DRC (Dynamic Range Control): (Default: ON) |
|
| ||||||||||||||
| Set to “ON” to compress the range between soft and loud sounds. | SETUP | |||||||||||||||
ENTER | Set to “OFF” to hear the original Dynamic Range soft and loud sounds. |
| |||||||||||||||
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Select the | ENTER |
| ||||||
|
| AUDIO_DRC |
|
|
|
|
|
| desired |
|
| Notes: | |||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| DRC | ON | ON |
|
|
|
|
|
|
|
| ||||
|
|
| DOWN SAMPLING | OFF |
|
|
| OFF |
|
| setting. |
|
|
|
| ||
|
|
| DOLBY DIGITAL |
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| ||||||||
AUDIO menu |
|
| ENTER | ENTER |
| DRC: | |
|
|
|
|
|
|
| • This function is |
|
| DOWN SAMPLING: (Default: ON) |
|
| available only on discs | ||
AUDIO_DRC | OFF |
|
| which are recorded | |||
DOWN SAMPLING | Set to “ON” when outputting in 48kHz. |
|
| in the Dolby Digital | |||
DRC | ON | Set to “OFF” when outputting the original sound. |
| format. | |||
DOLBY DIGITAL |
|
| |||||
|
|
|
|
| Select the |
| DOWN SAMPLING: |
|
| AUDIO_DOWN SAMPLING | OFF | desired | ENTER | • When playing back | |
|
| DOWN SAMPLING | OFF | setting. |
| discs with copyright | |
|
| DRC | ON | ON |
|
| protection, the sound |
|
| DOLBY DIGITAL |
|
|
|
| |
|
|
|
|
| ENTER |
| will be down sampled |
|
|
|
| ENTER |
|
| at 48kHz, even if you |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| set to “OFF”. |
|
| DOLBY DIGITAL: (Default: BITSTREAM) |
|
|
| ||
|
| Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder. |
| ||||
•BITSTREAM: outputs Dolby Digital signals.
•PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL |
|
| Select the | ENTER |
DRC | BITSTREAM | BITSTREAM | desired | |
DOWN SAMPLING | PCM | PCM | setting. |
|
DOLBY DIGITAL |
|
|
| |
| ENTER |
| ENTER |
|
Instructions continue on the next page.
15 | EN |