Magnavox MDV2400 owner manual Connection to an Audio System, Rear Terminals, Digital Audio OUT

Connection to an Audio System

Analog Audio Connection

stereo system

Audio	analog audio
	input jacks
	L	R

audio cable

Digital Audio Connection

Dolby Digital decoder,

MD deck or DAT deck

COAXIAL

	Digital audio
	input jack
digital audio
coaxial cable
	DIGITAL
	AUDIO OUT
DIGITAL
AUDIO OUT	COAXIAL

This unit

AUDIO OUT

L

Setting	SETUP > AUDIO>
Connection	DOLBY DIGITAL
Connecting to a Dolby Digital decoder	BITSTREAM
for Dolby Digital audio output.

SETUP

AUDIO

OUT

Supplied cables used in this connection are as

follows:

• Audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

Rear Terminals

Connecting to the other device	PCM
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.

* To complete these settings, refer to pages 14-15.

Notes:

•The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters.

•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

1	3	4
CB/PB	Y
		L
		DIGITAL
		AUDIO OUT
		R

CR/PR VIDEO AUDIO COAXIAL

OUT OUT

COMPONENT

VIDEO OUT

2

AC plug

1COMPONENT VIDEO OUT jacks

Connect optional component video cable here through the Component Video In jacks on a television.

2VIDEO OUT jack

Connect a yellow video cable here through the Video In jack on a television.

3AUDIO OUT jacks

Connect an audio cable here through the Audio In jacks on a television or another audio device.

4DIGITAL AUDIO OUT COAXIAL jack

Connect a digital audio coaxial cable here through the Digital Audio Coaxial In jack on a decoder or audio receiver.

Note:

•Please purchase the necessary cables at your local store. (Refer to pages 6-7.)

7 EN