Magnavox MDV2400 owner manual Information, Specifications

FReset to the Default Setting (Except for PARENTAL Setting)

1 Press [SETUP]	2 Select “INITIALIZE”.	3 Select the desired PLAYER
	SETUP	MENU Language, using
		[the Number buttons]
STOP	ENTER
		ENTER

Note:

• When you do not

wish to initialize,

press [SETUP] to

exit the menu at

step 2.

<SETUP MENU>

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

PLAYER MENU

Troubleshooting Guide

Press twice.

INITIALIZE_INITIALIZE

INITIALIZE YES

INFORMATION

SELECT MENU LANGUAGE

1ENGLISH

2 FRENCH

3 SPANISH

If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.

Problem	Corrective action
No power	–Check if the AC power cord is properly connected.
	–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
No sound or picture	–Check if the TV is switched On.
	–Check the Video connection.
	–Check the Audio/Video cable connections to the TV. (Refer to page 6.)
	–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Distorted picture	–Connect the unit directly to the TV.
	–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it On only if your TV has Progressive Scan
	and when you are using the Component Video connections between the unit and the TV. Disable
	Progressive Scan for all other connections. (Refer to page 6.)
Completely distorted picture or	–Connect this unit directly to the TV.
black/white picture with DVD	–Make sure the disc is compatible with the unit.
No sound or distorted sound	–Adjust the volume.
	–Check that the speakers are connected correctly.
No audio at digital output	–Check the digital connections.
	–Check if the audio format of the selected audio language matches your receiver capabilities.
No DTS audio is output.	This unit does not support DTS audio. This is not a malfunction.

Picture freezes momentarily during playback. –Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.

–Clean the disc.

–Ensure the disc is inserted in correct direction. –Check if the disc is defective by trying another disc.

Disc cannot be played back.–Cancel the parental lock or change the control level. –Insert a correct disc that plays back on this unit.

–Handle a disc with special care so that it does not have fingerprints, scratches or dusts on its surface. –If unit moved from cold to warm temp then possible moisture inside unit can cause no playback. Let

unit set in warm area for 1-2 hours and try again.

No return to start-up screen when disc is removed. –Reset the unit by switching Off the unit, then On again.

	–Aim the remote control directly at the sensor on the front panel.
The unit does not respond to	–Reduce the distance to the unit.
	–Replace the batteries in the remote control.
the remote control.	–Re-insert the batteries with their polarities (+/– signs) as indicated.
	–Press and hold any button on Remote toward a digital or telephone camera. The Remote is working if
	you confirm flashing infrared light through the camera.
Buttons do not work or the unit stops responding. –To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some	–Operations may not be permitted by the disc. Refer to the instructions of the disc.
operating commands during playback.
The unit cannot read CD / DVD.	–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
	–The angle cannot be switched for a DVD which does not contain multiple angles. In some cases

Angle does not switch. multiple angles are only recorded for specific scenes.

Playback does not start when the title is selected. –Check the “PARENTAL” setting.

The password for rating level has been forgotten. –Enter the default password “4737”, then your forgotten password will be cleared.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

•Playback from a desired track and random playback are not available during programmed playback.

•Some functions are prohibited on some discs.

Specifications

Output signal format:	Operating temperature:			Weight:
NTSC color	41°F (5 °C) to 104 °F (40 °C)			Approx 1.77 lbs. (0.80 kg)
Power source:	Dimensions:		(210 mm)	• Designs and specifications are subject to
120 V AC +/- 10 %, 60 Hz +/- 0.5 %	W : 8.3 inches			change without notice.
Power consumption:	H	: 2.0 inches	(50 mm)	• If there is a discrepancy between languag-
7 W (standby : 0.9 W)	D	: 9.7 inches	(245 mm)	es, the default language will be English.

INFORMATION

17 EN