Operating your radio - DAB
1. Fully extend the wire aerial.
2. | If your sound system is in standby mode, press the On/Off button | 2 |
| ||
| [On/off on the remote control] to switch on your sound system. |
|
3. | Press and release the Function button to select DAB. The display |
|
| will show "DAB" and then " Now tuning" for a few seconds. |
|
4. | If this is the first time the sound system is used a quick scan of UK Band | 3 |
III DAB channels may be carried out (the scan is normally performed automatically when the clock is first set - page 8). If the radio has been used before, the last used station will be selected. If new radio stations are found, they will be added to the stored list of stations.
5.When first switched on, the first station in the list of stations found will be played. The display will show the station name in the first line of the display and other information in the second line.
6.If the station list is still empty after the scan operation your radio will display "Station not available".
7.If no signals are found it may be necessary to relocate your radio to a position giving better reception, and then repeat the scan using the AutoScan facility (page 12).
9