Using the sound system for the first time
1.Place your sound system on a flat surface.
2.Fully extend the wire aerial located on the side of your sound system.The wire should be fully extended and positioned for optimum reception.
3.Plug the mains lead into the Mains socket located on the left hand side of your sound system ensuring that the plug is pushed fully into the socket.
4.Plug the other end of the mains lead into the wall socket and switch on the wall socket.
IMPORTANT: The mains plug is used as the means of connecting the sound system to the mains supply. The mains socket used for the sound system must remain accessible during normal use. In order to disconnect the sound system from the mains completely, the mains plug should be removed from the mains socket outlet completely.
5.Whenyoursoundsystemisfirstswitchedonthedisplaywillshow"Setting Clock" and a station search will be performed automatically.
6.When stations have been found, the clock information will appear on the display. Press the Display button to toggle between showing the time only or showing both the date and time.
7.If no stations have been found "Clock not set" will be displayed. It may then be necessary to relocate your sound system to a position giving better reception. You should then carry out an autoscan to find stations as described on page 12.
If you need any further advice, please call our Technical Helpline on :- | 8 | |
020 8758 0338 | ||
|