Roberts Radio CR9935 manual Pre-setting stations

Page 14

Pre-setting stations

You may store up to 10 different stations on each of the two wavebands giving a total of 20 preset stations.

1.Switch on your radio using the On/Off button.

2.Select the desired waveband using the Band button.

3.Tune into the required station using one of the tuning methods previously described.

4.Press and release the Memo button, the word 'Memory' will flash in the display.

5.Whilst 'Memory' is flashing press one of the Preset buttons under which you wish to store the station. Presets 6 to 10 are obtained by pressing the Preset button twice.

6.Press the Memo button to store the station. The preset number will now appear under 'Memory' in the display.

7.Repeat the above procedure for the remaining presets

8.Press the On/Off button to switch off your radio.

Note: Pre-setting of stations can only be carried out whilst 'Memory' is flashing in the display (5 seconds).

12

4

5

6

8

13

Image 14
Contents CR9935 Important Information please read before use Automatic Plug and Play setup Controls Top 1718 Headphone socket Volume control Controls Left side Right sideDisplay Night light Mains operationDisplay backlight Setting the clock automatically Setting the clock manually Setting the day of week manuallyWake to buzzer Setting the alarm timesDisplaying the alarm time Snooze control Sleep timerWake To radio Weekend alarm cancel Operating your radio search tuningOperating your radio manual tuning Pre-setting stations Recalling a preset station Last station memoryProgramme Identification PI Clock Time CT automatic adjustmentProgramme Service PS name Programme Type PTYOperating your radio using RDS Radio data system Display ModesProgramme type display PTY Programme Type search PTY Traffic Announcements TAPage Demonstration mode HeadphonesMains supply Back-up battery not necessary for the unit to functionGeneral FuseSpecifications Circuit Features Power RequirementsRoberts Radio Technical Services Department