Presetting stations
There are 7 memory presets for each of the 3 wavebands.
1.Press the On/Off button to switch on the radio.
2.Tune to the required station using one of the methods previously described.
3.Press and hold down the required Preset button until the radio beeps (greater than 2 seconds) The preset number will appear in the display and the station will be stored under the chosen preset button.
4.Repeat this procedure for the remaining presets.
5.Stations stored in preset memories may be overwritten by following the above procedure.
If you need any further advice, please call our Technical Helpline on :-
1
3
020 8758 0338 | 12 |
|