Roberts Radio CR2002 manual Alarms, Setting alarms to wake to radio

Page 15

Alarms

Your clock radio is equipped with two alarms which can be operated independently of each other.

Each of the alarms can be set so that you wake to either the radio or buzzer alarms.

The alarms can be set with the radio switched On or Off.

Setting alarms to wake to radio

The radio alarm will sound for one hour unless turned off by pressing the On/Off button. Pressing the On/Off button whilst the alarm is sounding will cancel the alarm for 24 hours.

1.Press the Alarm 1 or Alarm 2 buttons alarm 1 or alarm 2 time will flash in the display.

2.Press the Set button, alarm hour will flash in the display.

3.Press the up or down button to adjust the hour. The clock uses a 12 hour display with a AM/PM indicators. Please ensure that the correct 12 hour cycle is selected.

4.Press the Set button, alarm minute will flash in the display.

5.Press the up or down button to adjust the minute.

(continued on next page)

If you need any further advice, please call our Technical Helpline on :-

1

1

2

33

4

55

020 8758 0338 (Mon-Fri)

14

 

Image 15
Contents CR2002 Contents Top ControlsControls Front Controls Base Display Automatic clock setting MSF radio signal Manual clock setting only if automatic setting fails Setting the date only if automatic setting fails Operating the radio Scan tuningManual tuning Presetting stations Recalling a preset station Setting alarms to wake to radio AlarmsSetting alarms to wake to radio Setting alarms to wake to buzzer Snooze function Cancelling alarms Alarm sound level controlNap timer Sleep timer Display buttonDisplay back light Time zone switch ResetHeadphone socket Specifications TroubleshootingGeneral Mains supplyFuse Guarantee