Operating your radio
Your radio is equipped with three tuning methods:- Manual tuning, Auto scan tuning and Memory preset tuning.
Auto scan tuning
1.Press the On/Off button to switch on your radio.
2.Select the required waveband by repeatedly pressing the Band but- ton. For the FM waveband fully extend the wire aerial and position for optimum reception. For MW reception there is a built in ferrite aerial. Rotate your radio to the position giving best reception.
3.Press and hold the Tuning up button for more than 0.5 sec your radio will search in an upwards direction (low frequency to high frequency) and stop automatically when it fi nds a station of suffi cient strength.
4.To fi nd other stations press and release the Tuning up button as before.
5.When the waveband end is reached the radio will continue tuning from the opposite waveband end.
6.To search in a downwards direction (high frequency to low frequency) press and hold the Tuning down button for more than 0.5 sec.
7.Press the Volume up and down buttons to set the required level.
8.To switch off your radio press the On/Off button. The display will show OFF.
If you need any further advice, please call our Technical Helpline on :-
1 2
63,4
7 7
8
020 8758 0338 | 10 |
|