Manual tuning

1.Press the On/Off button to switch on your radio.

2.Select the required waveband by repeatedly pressing the Band but- ton. For the FM waveband fully extend the wire aerial and position for optimum reception. For MW reception there is a built in ferrite aerial. Rotate your radio to the position giving best reception.

3.A single press on either the Tuning up or Tuning down buttons will change the frequency in the following increments:-

FM	50 or 100kHz
MW	9 or 10 kHz

4.When the waveband end is reached the radio will continue tuning from the opposite waveband end.

5.Press the Volume up or down buttons to set the required level.

6.To switch off your radio press the On/Off button. The display will show OFF.

1 2

3 3

5 5