Chapter 06
Broadcasting
Configure the Broadcasting settings for the product.
Auto Tuning
MENU m→ Broadcasting → Auto Tuning → ENTER E
Broadcasting
Auto Tuning
Aerial | Air |
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favorites
The Auto Tuning function memorizes all channels that are available over the aerial or through your cable system and adds them to the Channel List.
Auto Tuning
To start Auto Tuning, follow these steps:
1 Push MENU m→ Broadcasting → Auto Tuning → Auto Tuning → ENTER Eon your remote. The Auto Tuning screen appears.
2 On the Auto Tuning screen, select the source of your product signal.
――Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically start memorizing channels.
――Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3. ――Select Digital & Analogue, Digital or Analogue to scan for channels.
3 Sets Search Mode using 
/ 
buttons. When done, select Scan, and then press ENTER E. The product will start memorizing channels.
――Channel memorization can take up to 45 minutes, depending on your cable system.
――Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel buttons on your remote.
55