JVC LVT1266-001A manual Tuning in to a Preset Station, Tuning in to a Station, Presetting Stations

Continued

4 Press SEARCH/SCROLL UP		SEARCH/	UP	SEARCH/
		SCROLL	PRESET	SCROLL
		DOWN	GROUP	UP
or SEARCH/SCROLL DOWN			/
			SELECT
to select a station.			DOWN
			PRESET
			GROUP
• Each time you press the button, the station
changes step by step.
5 Press SELECT.		DOWN	GROUP	UP
		SEARCH/	UP	SEARCH/
		SCROLL	PRESET	SCROLL
Signal reception indicator and the			/
current signal strength level appear (filled			SELECT
			PRESET
			DOWN
blocks across from left to right).			GROUP
Signal reception indicator	Signal strength level

•If the signal strength level does not reach to the signal reception indicator, you cannot listen to the station well. In this case, adjust the position of the antenna.

6 Press SELECT again.	DOWN	GROUP	UP
	SEARCH/	UP	SEARCH/
	SCROLL	PRESET	SCROLL
A station is tuned in.		/
		SELECT
Station name Channel and frequency		DOWN
		GROUP
		PRESET

On the remote control ONLY:

1 Tune in to the station you want to preset.

2 Press PROGRAM.		PROGRAM
An available preset number starts flashing on the
display.
3 Press PRESET GROUP or	SEARCH/	GROUP	SEARCH/
		UP
	SCROLL	PRESET	SCROLL
PRESET GROUP to select a	DOWN		UP
		SELECT
preset number, then press		/
		GROUP
		DOWN
		PRESET
PROGRAM.
The preset station is stored in memory.
		PROGRAM

4 To preset more stations, repeat steps 1 to 3 above, allocating a different preset number to each station.

•Storing a new station on an already assigned number erases the previously stored one.

When you unplug the AC power cord or if a power failure occurs

The preset stations will remain in the unit.

Information sent from the station (Ex. program type)

Tuning in to a Preset Station

•For the description of information sent from the station, see page 20.

Tuning in to a Station

1 Press SEARCH/SCROLL UP	SEARCH/	UP	SEARCH/
	SCROLL	PRESET	SCROLL
	DOWN	GROUP	UP
or SEARCH/SCROLL DOWN		/
		SELECT
to select a station.		DOWN
		PRESET
		GROUP
The list of the station appears.

On the remote control ONLY:

1 Press FM/AM/DAB to select “DAB.”

The unit automatically turns on and tunes in to the previously received DAB station.

2 Press PRESET GROUP or SEARCH/

SCROLL

DOWN

PRESET GROUP repeatedly to select a preset number.

FM/AM/DAB

UPSEARCH/

PRESETSCROLL

GROUPUP

/

SELECT

DOWN

PRESET

GROUP

2	Press SELECT to tune in to the	SEARCH/	UP	SEARCH/
		SCROLL	PRESET	SCROLL
		DOWN	GROUP	UP
	selected station.		/
	• The unit does not tune in to the station		SELECT
			DOWN
			PRESET
	until you press SELECT.
			GROUP

Presetting Stations

You can preset 10 DAB stations manually.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

To tune in to a preset station directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) allows you	1	2	3
to select the preset number you want.
Ex.: For preset number 5, press 5.	4	5	6
For preset number 10, press +10,	7	8	9
then press 0.
		0	+10

When you press a number with no preset station

“Empty Preset” appears on the display.

18