Main
G-1
Warnings, Cautions and Others
UX-HB4
Front view
CAUTION (STANDBY/ON) button!
SAFETY INSTRUCTIONS SOME DOS AND DONTS ON THE SAFE USE OF EQUIPMENT
1
Power sources
Moisture condensation
Others
Introduction
Contents
Location of the Buttons and Controls
Main Unit
Display window
Main unit
8 e r tyu
345 6 89pq
12 7w
Remote Control
e r
i ;
1 2 3 4 8 p q
9 wa
Getting Started
Unpacking
Connecting DAB Antenna
Connecting Speakers
You can connect the speakers using the speaker cords.
12,3
Connecting AM (MW) and FM Antennas
Place the antenna away from the unit and adjust its position for the best reception.
Adjust the position for the FM antenna for the best reception.
8
Connecting Other Equipment
To connect an audio equipment
Putting the Batteries into the Remote Control
NOW you are ready to plug in the unit.
Common Operations
Setting the Clock
to
Repeat steps
Press CLOCK for more than 2 seconds.
Turning On the Power
Turning Off the Unit Automatically (Auto Standby)
Selecting the Source
Adjusting the Volume
Fade-Out Muting (FADE MUTING)
Press FADE MUTING.
Selecting the Sound Modes
Reinforcing the Bass Sound
Press and hold SOUND/HBS.
Playing Back Discs
When playing CD-Rs or CD-RWs
Notes for MP3 files
General notes
Basic Disc Operations
To stop playing for a moment
For Audio CD: To go to another track
To go to another track directly using the number
To locate a particular point in a track
Programming the Track Playing Order Program Play
Repeat step
Place a disc.
Press or 4 to select the track number, then press
to program other tracks you want.
Repeating TracksRepeat Play
Press REPEAT.
Playing at RandomRandom Play
Press RANDOM.
Displaying the Remaining Time during Playback (for Audio CD)
Playing Back Tapes
Listening to DAB Broadcast
What is DAB?
Initial Scanning
Press FM/AM/DAB repeatedly to select DAB.
Manual tuning
Tuning in to a Station
to select a station.
The list of the station appears.
Press SELECT to tune in to the selected station.
The unit does not tune in to the station until you press SELECT.
Arranging and Sorting the Station List
to select Service Order.
to select a desired option.
Changing the Dynamic Range Control level (DRC)
to select DRC Value.
Refreshing the Station List
Press SCAN briefly.
Press and hold SCAN for more than 2 seconds.
Changing the Display Information
Press DISPLAY.
Listening to FM and AM (MW) Broadcasts
To change the FM reception mode
To preset more stations, repeat steps
to
above, allocating a different preset number to each station.
Tuning in to a Preset Station
Press FM/AM/DAB to select either FM or AM (MW).
PRESET GROUP repeatedly to select a preset number.
To tune in to a preset station directly using the number
Receiving FM Stations with RDS
Searching for Programs by PTY Codes (PTY Search)
Press UP or DOWN repeatedly until the PTY code you want appears on the display.
Press SEARCH/SCROLL UP or SEARCH/SCROLL UP (or SCROLL UP or SCROLL DOWN on the unit).
Changing the RDS Information
Press DISPLAY.
Using an External Equipment
To exit AUX mode, select other source.
Description of the PTY codes
may be different from the above list on this page.
Start playing the sourceFM, AM (MW), DAB or auxiliary equipment connected to AUX jack.
Recording
Recording on a Tape
Put a recordable cassette in with the exposed part of the tape down.
Close the cassette holder gently.
Recording Discs Disc Synchronized Recording
Using the Timers
Using Daily Timer and Recording Timer
How the Timer actually works
Before you start...
Press TIMER repeatedly to select the timer you want to adjust and activate 1, 2, 3, or Rec.
Using Snooze Timer
Press DAILY TIMER/ SNOOZE while Daily Timer is in operation.
Using Sleep Timer
How the Sleep Timer actually works
Press SLEEP.
Wait for about 5 seconds after specifying the length of time.
Maintenance
General Notes
Cleaning the unit
Handling discs
Handling cassette tapes
Troubleshooting
Symptom
Possible Cause
Action
Amplifier Section
Specifications