Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service.
Symptom
Power does not come on.
No sound is heard.
| Possible Cause |
|
| Action |
The power cord is not connected to an | Insert the plug into the socket. | |||
AC outlet. |
|
|
| |
|
|
|
|
|
• | Connections are incorrect or loose. | • | Check all connections and make | |
|
|
|
| corrections. (See pages 6 to 8.) |
• | A pair of headphones is connected. | • | Unplug the headphones from the | |
|
|
|
| PHONES jack. |
• | MP3 disc is recorded with “packet | • | It cannot be played. Replace the disc. | |
| writing.” |
|
|
|
|
|
|
|
|
Hard to listen to broadcasts because of noise.
•Antennas are disconnected.
•For AM (MW):
The AM (MW) loop antenna is too close to the unit.
•For DAB and FM:
The antenna is not properly extended and positioned.
•Reconnect the antenna correctly and securely.
•Change the position and direction of the AM (MW) loop antenna.
•Extend antenna and orient to the best reception position.
The disc does not play.
Impossible to record.
Operations are disabled.
Unable to operate the unit by the remote control.
The disc is upside down. | Put the disc in with the label side up. | |||
|
|
| ||
Small tabs on the back of the cassette are | Cover the holes with adhesive tape. | |||
removed. |
|
|
| |
|
|
| ||
The | Unplug the AC power cord then plug it | |||
malfunctioned due to external electrical | back in. | |||
interference. |
|
|
| |
|
|
|
|
|
• | The path between the remote control | • | Remove the obstruction. | |
| and the remote sensor on the unit is |
|
|
|
| blocked. |
|
|
|
• | The batteries are exhausted. | • | Replace the batteries. (See page 8.) | |
• | You are using the remote control too | • | Signals cannot reach the remote | |
| far from the unit. |
|
| sensor. Move closer to the unit. |
|
|
|
|
|
31