Common Operations
Setting the Clock
Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “0:00” starts flashing on the display.
You can set the clock when the unit is in standby mode.
5 Press UP or DOWN to adjust | DOWN | GROUP | UP |
| SEARCH/ | UP | SEARCH/ |
| SCROLL | PRESET | SCROLL |
the minute, then press SET. |
| / |
|
|
| SELECT |
|
|
| DOWN |
|
|
| PRESET |
|
|
| GROUP |
|
On the remote control ONLY:
1 Press CLOCK for more than 2 seconds.
CLOCK
• When you press and hold UP or DOWN, the | SET |
minute indication changes continuously. |
|
The day of the week indication starts flashing. |
|
Clock setting appears on the display.
2 Press UP or DOWN to select the clock synchronization setting, then press SET.
SEARCH/ | UP | SEARCH/ |
SCROLL | PRESET | SCROLL |
DOWN | GROUP | UP |
/
SELECT
DOWN
PRESET
GROUP
6 | Press UP or DOWN to adjust | SEARCH/ |
SCROLL | ||
|
| DOWN |
| the day of the week, then press |
|
| SET. |
|
Display brightness setting when the unit is in standby mode appears on the display.
UPSEARCH/
PRESETSCROLL
GROUPUP
/
SELECT
DOWN
PRESET
GROUP
SET
On The unit’s clock is adjusted automatically with the FM RDS signal on next time you tune in to an
SET
FM station.
Off The unit’s clock is adjusted manually.
The time system indication starts flashing.
3 Press UP or DOWN to adjust the DOWN | PRESET | UP |
SEARCH/ | UP | SEARCH/ |
SCROLL |
| SCROLL |
time system, then press SET. | GROUP |
|
/ |
| |
| SELECT |
|
| DOWN |
|
| PRESET |
|
| GROUP |
|
•If you want to change the time setting, press CANCEL repeatedly to return step 2.
7 Press UP or DOWN to adjust | DOWN |
| SEARCH/ |
| SCROLL |
the brightness, then press SET. |
|
The brightness level can be adjusted between “0” (canceled) to “3” (most bright). The greater number you set, the brighter the display is.
UPSEARCH/
PRESETSCROLL
GROUPUP
/
SELECT
DOWN
PRESET
GROUP
SET
12H The hour indication is displayed with | SET |
| ||
|
|
|
| |
| a |
|
| |
| “PM”). |
|
| |
|
|
|
|
|
| 24H The hour indication is displayed with |
|
| |
|
|
| ||
|
|
|
|
|
The hour indication starts flashing. |
|
| ||
4 Press UP or DOWN to adjust the DOWN | GROUP | UP | ||
| SEARCH/ | UP | SEARCH/ | |
| SCROLL | PRESET | SCROLL | |
hour, then press SET. | / |
| ||
|
|
| SELECT |
|
|
|
| DOWN |
|
|
|
| PRESET |
|
|
|
| GROUP |
|
• When you press and hold UP or DOWN, | SET |
| |
the hour indication changes continuously. |
|
•The clock is working even while setting. The minute indication starts flashing.
The unit’s clock starts working with the time you adjusted.
•When you unplug the AC power cord or if a power failure occurs
The clock is reset to “0:00.” If this happens, set the clock again.
•The clock may gain or lose 1 to 2 minutes per month (when the clock synchronization is turned off)
If this happens, set the clock again.
To adjust the clockOn the remote control ONLY:
1 | Press CLOCK for more than 2 seconds | CLOCK |
|
when the unit is in standby mode.
Clock setting appears on the display.
2 Repeat steps 2 to 7 of “Setting the Clock” procedure.
9