To reduce the
On the remote control ONLY:
If the beats are heard while recording an AM | REMAIN |
/BEAT CUT |
(MW) broadcast, press BEAT CUT repeatedly until the beats are reduced.
•Each time you press the button, the display
alternates between “Beat Cut – 1” and “Beat Cut – 2.”
To stop recording for a moment, press REC. |
| REC | |
|
|
| |
Both the disc playback and tape recording are |
|
| |
paused. To resume recording, press TAPE ¤ ‹. |
| ||
To stop recording, press 7. | SCROLL DOWN | SELECT | SCROLL UP |
4 | 7 | ¢ | |
The recording stops and the disc playback is paused.
Recording Discs
You can start disc play and recording at the same time.
On the unit ONLY:
1 Put a recordable cassette in with the exposed part of the tape down.
•See also page 16.
2 Close the cassette holder gently.
3 | Press CD ‹/8 to select the CD |
| CD | |||
| #/8 | |||||
|
|
| player as the source. |
|
| |
|
|
|
|
|
| |
|
|
| Press 7 to stop the disc |
|
|
|
4 |
| 4 | 7 | ¢ | ||
|
|
|
| SCROLL DOWN | SELECT | SCROLL UP |
playback.
•You can make a program (see page
14)if you want.
5 Press REC (recording). | REC | ||
|
|
| |
|
| 3 indicator lights up on the display. |
|
|
|
| |
|
|
|
|
6 Press TAPE ¤ ‹. | TAPE |
“Sync. Record” appears and 3 indicator starts flashing slowly on the display.
Disc playback and tape recording starts automatically.
•If no cassette is inserted when you press REC “No Tape” appears on the display.
•If a protected tape is inserted when you press REC “Protect” appears on the display.
To record on both
On the remote control ONLY:
Press REV. MODE (reverse mode) | REV. MODE | ||
repeatedly until | or | is lit on the |
|
display. |
|
|
|
•When using the Reverse Mode for Disc
Synchronized Recording, 
lights up and the recording starts in the forward ( 3 ) direction first. When the tape reaches its end, the disc playback is paused until the tape recording changes to the reverse direction, then the recording continues.
To cancel the Reverse Mode, press REV. MODE repeatedly
until 
is lit on the display.
When making Sleep Timer settings while doing Disc Direct Recording
Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.
26
