Roberts Radio Ecologic 3 manual Selecting a station DAB, Secondary services DAB

Page 8

Selecting a station - DAB

1. The top line of the display shows the name of the station currently selected.

2. Press either of the Tuning Up or Down buttons to scroll through the

2

2

list of available stations.

 

 

3. Press and release the Select button to select the station. The display may show "Tuning" while your radio fi nds the new station.

3

4. Adjust the Volume and Tone controls to the required setting.

Note: If after selecting a station the display shows "Not Available" it may be necessary to relocate your radio to a position giving better reception.

4

4

Secondary services - DAB

1. Certain radio stations have one or more secondary services associated

 

with them. If a station has a secondary service associated with it the

 

display will show ">>" next to the station name on the station list. The

 

secondary service will then appear immediately after the primary

2

service as you press the Tuning Up button.

2. Press the Select button to select the station.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Roberts Contents Controls Front Controls Back Battery operation Using the AC adaptor Operating your radio DAB Carefully extend the telescopic aerialSecondary services DAB Selecting a station DABDisplay modes DAB Signal strength display DAB Finding new stations DABManual Tuning DAB Autoselect DABDynamic Range Control DRC settings DAB DRCAlphanumeric Station order setup DABFavourite stations Active station Prune stationsOperating your radio FM Manual tuning FM Display modes FM Presetting stations Recalling a presetStereo / Mono setting FM Scan sensitivity setting FM 4,5System reset Software versionHeadphone socket Display backlightSpecifications Circuit Features GeneralGuarantee
Top Page Image Contents